We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40 by 15 mm case fan with two wires

Zyvpee

Zyvpee 109P0424H702 40x15mm 24V .08A 2-pin case fan

SKU CH-NSRR-SZQP9

A 40 by 15 millimetre DC case fan with ball bearing, 24 volt .08 amp two-pin power, non-LED black frame

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC Case Fan
  • Compact 40 × 15 mm frame fits tight chassis spaces
  • 24 V DC motor runs on standard server rails
  • Low 0.08 A draw keeps power budgets lean
  • Ball-bearing design extends operational lifespan
  • Simple two-pin connector enables quick installation

Zyvpee 109P0424H702 40mm DC Fan

This Zyvpee 109P0424H702 is a 40mm by 15mm DC case fan that runs on 24V power and draws 0.08A. It uses a two-pin connector and ball-bearing construction for reliable rotation. The compact frame suits tight chassis spaces or targeted component cooling where a small footprint is essential.

Sustained-load behaviour with ball bearing

The ball-bearing design maintains consistent speed during continuous operation without the wear patterns common in sleeve alternatives. Steady 24V input keeps airflow stable across long sessions rather than dropping off as temperatures rise. This makes the unit suitable for always-on enclosures or industrial inverter cooling duties.

Two-pin installation and polarity care

Connection is straightforward: align the two-pin header with the motherboard or controller socket and press home. The only common issue is reversed polarity, which will prevent the fan from spinning but causes no damage. No PWM signal wire is present, so speed control depends entirely on voltage regulation from the host header.

Highlights

  • Compact 40 × 15 mm frame fits tight chassis spaces
  • 24 V DC motor runs on standard server rails
  • Low 0.08 A draw keeps power budgets lean
  • Ball-bearing design extends operational lifespan
  • Simple two-pin connector enables quick installation

Specifications

BrandZyvpee
Series109P0424H702
Model109P0424H702
TypeCase Fan
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions40*15mm

Questions about this item

How much heat and noise does the 40 mm ball-bearing fan produce when it runs continuously at 24 V?

The 40×15 mm frame and ball bearing keep vibration low; at 24 V and .08 A the motor draws minimal current, so sustained operation stays cool and quiet.

What power source must I already have to run this 2-pin 24 V fan?

A 24 V DC supply with a standard 2-pin header — such as a motherboard fan header, fan controller or dedicated 24 V rail — is required to power the 109P0424H702.

Will the 4015 form-factor fit the same mounting holes as my older 40 mm fans?

Yes, the 40×15 mm dimensions match the common 4015 footprint, so existing 40 mm screw patterns line up without modification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.