WORKPRO Compression Sleeve Puller JMTT-001 1/2" Set 6.7 lb
Removes 1/2-inch compression sleeves from corroded or frozen fittings without damaging walls, copper pipes or supply lines
- TypeFlaring & Swaging Tools
- Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
- Weight?6.7 pounds
- Voltage12
- Selling UnitSet
- Removes sleeves without damaging walls or copper pipes
- Extracts corroded or frozen supply stops with lever action
- Reforms crimped copper back to a perfect circle
- Designed for 1/2-inch compression fittings only
- Drop-forged metal body built for heavy-duty use
1/2-Inch Compression Sleeve Puller Set
This WORKPRO tool set removes leaking 1/2-inch compression sleeves from copper pipe without damaging walls or supply lines. The drop-forged body and precision-machined screw pull the nut and ferrule off corroded or frozen supply stops. It reforms crimped copper back to a round profile so a new quarter-turn valve can be fitted on dishwashers, sinks or toilets. Weight is 6.7 lb.
Size-Specific Limitation
The puller works only on 1/2-inch compression fittings and accepts 15/16-inch and 5/8-inch nuts plus 3/8-inch and 1/2-inch MPT threads. It cannot engage larger or smaller sleeve sizes, so multi-size jobs require additional tools. The narrow-stile, out-opening fitment suits tight spaces but does not adapt to other pipe diameters.
Pre-Installation Checklist
Verify that the existing supply stop uses a 1/2-inch compression sleeve and that the nut matches the 15/16-inch or 5/8-inch profiles listed. Confirm there is enough clearance to operate the lever in the work area. Ensure the pipe material is copper, as the tool is designed to reform copper without damage.
Highlights
- Removes sleeves without damaging walls or copper pipes
- Extracts corroded or frozen supply stops with lever action
- Reforms crimped copper back to a perfect circle
- Designed for 1/2-inch compression fittings only
- Drop-forged metal body built for heavy-duty use
Specifications
| Type | Flaring & Swaging Tools |
|---|---|
| Compatibility/Fitment | Out-Opening, Narrow Stile, Store Front Doors |
| Weight | ?6.7 pounds |
| Voltage | 12 |
| Brand | WORKPRO |
| Selling Unit | Set |
| Part Number | JMTT-001 |
Questions about this item
Is the WORKPRO JMTT-001 sold as a single tool or a set?
It is sold as a set that includes the compression sleeve puller and an angle stop wrench for 1/2-inch compression fittings.
How does the puller handle a corroded or frozen supply stop in practice?
The drop-forged body and machined screw are corrosion-resistant, letting you turn the lever to extract the sleeve without damaging the copper pipe.
What thread sizes does the included angle stop wrench cover?
The wrench fits 15/16-inch and 5/8-inch nuts as well as 3/8-inch and 1/2-inch MPT threads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Climax Metal Products
Climax Metal Products Rigid Shaft Coupling 1 in Bore Stainless Steel 4000 RPM 1330 in-lb
$136.99
0.00160322BTC
In stock
