We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel pipe nipple, threaded both ends, 10 inches long

Beck C. H.

Beck C. H. 1-1/2" 10" Galv Steel Pipe Nipple

SKU CH-TWS7-67S2S

Galvanised steel pipe nipple with threaded male ends, Schedule 40 rated for 150 psi at 150 °F

  • MaterialHAWA
  • Galvanised coating resists corrosion
  • Male threaded ends connect to Schedule 40 fittings
  • Rated 150 psi at 150 °F for air, gas, oil, steam, water
  • Continuous weld construction ensures leak-free strength
  • Made in USA from Grade A steel

Galvanized Steel Pipe Nipple

This galvanized steel pipe nipple is built for air, gas, oil, steam and water lines. It suits installers and maintenance crews who need a Schedule 40 fitting with male threaded ends. The 10-inch overall length fits standard pipe runs in commercial and industrial systems. Made in USA from Grade A steel with a continuous weld construction.

Thermals noise and power draw

As a passive metal fitting, this nipple generates no heat, noise or electrical draw during operation. The galvanized coating resists corrosion in wet or humid environments. It handles a maximum operating pressure of 150 psi at 150 degrees Fahrenheit. The welded seam maintains structural integrity under normal service conditions.

Upgrade path and fit

This nipple replaces worn or corroded Schedule 40 threaded fittings in existing 1-1/2 inch nominal pipe systems. The jump is worth it when threads are stripped, leaks appear at the joint or the original fitting shows heavy scale buildup. It is not for lines requiring a different nominal size, schedule rating or connection type such as flanged or grooved ends.

Highlights

  • Galvanised coating resists corrosion
  • Male threaded ends connect to Schedule 40 fittings
  • Rated 150 psi at 150 °F for air, gas, oil, steam, water
  • Continuous weld construction ensures leak-free strength
  • Made in USA from Grade A steel

Specifications

MaterialHAWA
BrandBeck

Questions about this item

How do I install the 1-1/2" galvanized steel nipple with its Schedule 40 threaded male ends?

Apply thread sealant or tape to the male threads, then tighten into the matching female fitting using a pipe wrench on the wrench flats; the step often missed is cleaning both thread sets thoroughly before sealing.

What maintenance or replacement will the galvanized coating and welded steel body need over time?

Inspect the galvanized finish periodically for white rust or flaking, especially at the continuous weld seam, and replace the nipple if corrosion reduces the 1 39/64 in inside diameter or causes leaks at the threads.

What pressure or temperature limit will be reached first during sustained steam or water service?

The maximum operating pressure is 150 psi at 150 Degrees F; sustained use above either value will exceed the Schedule 40 rating before any other limit appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.