We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten zinc-plated steel grease fittings M10x1mm straight head 5/8in length

Westward

Westward 52NZ38 Grease Fitting M10x1mm PK10

SKU CH-KY39-R3HKT

Pack of ten straight M10×1.00 mm steel grease fittings rated to 6,000 psi and meeting DIN 71412

  • Straight head eases access in tight spots
  • Zinc-plated steel resists corrosion for longer service
  • M10 × 1.00 mm metric thread fits standard ports
  • Rated to 6 000 psi for high-pressure systems
  • Pack of 10 covers multiple lubrication points

Grease Fittings M10 × 1.0 mm Pack of 10

These steel grease fittings suit workshops and maintenance teams that service machinery with metric M10 × 1.0 mm ports. The straight head design allows direct access where angled fittings cannot reach. Each fitting is zinc-plated for corrosion resistance in damp or outdoor environments. The pack of ten keeps spares on hand for fleet or plant upkeep.

Sustained Pressure Performance

Rated to 6,000 psi, the fittings maintain a seal during extended grease-gun cycles without weeping or blow-off. The one-piece steel body resists deformation when pumps run at high output for long periods. Zinc plating holds up against repeated exposure to lithium and calcium greases. Conformance to DIN 71412 ensures dimensional consistency across the batch.

Upgrade from Worn or Mixed Thread Fittings

Replaces damaged, corroded or mismatched fittings that leak under pressure or accept the wrong coupler. The metric M10 × 1.0 mm thread eliminates cross-threading common when imperial fittings are forced into metric ports. The jump is worth it when a single loose fitting risks bearing failure or unplanned downtime. Not for systems that require angled or button-head access.

Highlights

  • Straight head eases access in tight spots
  • Zinc-plated steel resists corrosion for longer service
  • M10 × 1.00 mm metric thread fits standard ports
  • Rated to 6 000 psi for high-pressure systems
  • Pack of 10 covers multiple lubrication points

Specifications

BrandWESTWARD

Questions about this item

Will the zinc-plated steel fittings handle continuous 6,000 psi pressure without leaking or overheating?

The fittings are rated for a maximum pressure of 6,000 psi and meet DIN 71412 standards, with a steel body and zinc-plated finish designed for high-pressure lubrication systems.

Do I need a grease gun with an M10x1.00 mm thread to use these fittings?

Yes, each fitting has a metric M10-1.00 mm thread, so your grease gun or adapter must match that exact thread size for proper installation.

Can I install these straight-head fittings on older equipment that uses the same M10 metric thread?

The straight head and M10x1.00 mm metric thread allow direct replacement on compatible legacy equipment, provided the existing port matches the thread specification.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.