We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel braided faucet supply line with brass compression and FIP fittings, 20in length

KISSLER AND CO., INC.

KISSLER AND CO., INC. Faucet Supply Line 88-2002 3/8x1/2 20in

SKU CH-GSVT-GT8QA

Connects faucets with a 20-inch stainless-steel braided hose rated for 250 psi at 70°F and temperatures from 40°F to 180°F

  • MaterialMetal
  • Durable stainless steel cover protects PVC hose
  • Brass compression and FIP fittings ensure leak-free seal
  • Rated 250 psi at 70°F for reliable pressure handling
  • Operates from 40°F to 180°F across hot and cold lines
  • IAPMO and NSF certified for safe potable water use

Faucet Supply Line for Kitchen and Lavatory Use

This 20-inch connector joins a 3/8-inch compression fitting to a 1/2-inch FIP thread. It is built for standard kitchen and lavatory faucet installations in residential and light commercial plumbing.

Stainless-Steel Covered PVC Hose with Brass Ends

The PVC inner tube handles water temperatures from 40 to 180 degrees Fahrenheit at up to 250 psi working pressure at 70 degrees. A stainless-steel outer braid protects the hose from abrasion and kinking, while brass compression and FIP fittings resist corrosion for a durable seal.

IAPMO and NSF Certified for Potable Water

Certified to IAPMO and NSF standards, the line meets requirements for drinking-water safety. The bulk hose configuration and 5/16-inch inside diameter suit typical faucet connections, though installers needing different thread types or longer runs will need alternative parts.

Highlights

  • Durable stainless steel cover protects PVC hose
  • Brass compression and FIP fittings ensure leak-free seal
  • Rated 250 psi at 70°F for reliable pressure handling
  • Operates from 40°F to 180°F across hot and cold lines
  • IAPMO and NSF certified for safe potable water use

Specifications

MaterialMetal
BrandKISSLER & CO

Questions about this item

How often should the stainless-steel braided hose and brass compression fittings be inspected or replaced?

The hose is rated for 250 psi at 70 °F and a temperature range of 40–180 °F; inspect annually for corrosion, kinks or fitting leaks and replace if any deterioration appears.

What pressure or temperature limit will be reached first during continuous hot-water use?

The 180 °F temperature ceiling is reached before the 250 psi pressure rating under normal hot-water supply conditions.

Does the PVC inner tube or stainless cover transmit vibration or heat when the faucet runs all day?

The PVC core and stainless-steel cover dampen water hammer and keep surface temperature close to the water temperature, so noise and heat transfer remain minimal during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.