We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 5-gallon pail of biodegradable hydraulic oil ISO 68

Renewable Lubricants

Renewable Lubricants Biodegradable Hydraulic Oil ISO 68 5 Gal 80844

SKU CH-E8M3-CNEFF

Biodegradable hydraulic oil ISO 68 in a 5 gal pail, vegetable base, operating from -10 °F to 250 °F with viscosity index 189 and flash point 478 °F

  • Biodegradable vegetable-oil base reduces environmental impact
  • ISO 68 viscosity grade suits high-pressure hydraulic systems
  • Wide -10 °F to 250 °F operating range handles temperature extremes
  • High 189 viscosity index maintains film strength across temperatures
  • 478 °F flash point improves fire safety in hot environments

Biodegradable hydraulic oil for industrial systems

This Renewable Lubricants fluid uses a vegetable-oil base and carries an ISO 68 viscosity grade. It is supplied in a 5 gal pail and operates from -10 Degrees F to 250 Degrees F. The formulation delivers a viscosity index of 189 and a flash point of 478 Degrees F.

Suits operators needing a readily biodegradable

Maintenance teams that require an NSF-rated lubricant or a product with a published Timken OK load value should look elsewhere. The fluid also does not carry an SAE grade designation, so applications tied to that classification will need a different oil.

ISO 68 viscosity grade determines equipment fit

The ISO 68 rating is the primary specification that decides whether this oil matches the hydraulic system's design requirements. Verify the grade against the equipment manual before purchasing.

Highlights

  • Biodegradable vegetable-oil base reduces environmental impact
  • ISO 68 viscosity grade suits high-pressure hydraulic systems
  • Wide -10 °F to 250 °F operating range handles temperature extremes
  • High 189 viscosity index maintains film strength across temperatures
  • 478 °F flash point improves fire safety in hot environments

Specifications

BrandRenewable Lubricants

Questions about this item

How much heat can the ISO 68 vegetable-oil fluid handle during continuous operation?

The oil is rated for a maximum operating temperature of 250 degrees F and a flash point of 478 degrees F, so it remains stable during extended high-heat duty.

What pump seals or materials are required to run this biodegradable hydraulic oil?

The fluid uses a vegetable-oil base with a viscosity index of 189; confirm your pump seals and hoses are compatible with vegetable-oil hydraulic fluids before filling.

Will this ISO 68 oil flow properly in a system that previously ran a lower-viscosity fluid at cold start?

With a pour point of -22 degrees F and a minimum operating temperature of -10 degrees F, it flows readily in cold conditions, but verify the original equipment specifies ISO VG 68 viscosity.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.