We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Weastlinks 15-pin power and 29-pin SAS SFF-8482 to 7-pin SATA cable, 50cm

weastlinks

Weastlinks 15-pin power + 29-pin SAS SFF-8482 to 7-pin SATA SAS cable 50cm

SKU CH-307P-C432J

Connects a 29-pin SAS SFF-8482 drive to 7-pin SATA and 15-pin power ports over 50cm

  • Combines 15-pin power and 29-pin SAS into one cable
  • 29-pin SFF-8482 connects to 7-pin SATA-style SAS port
  • 6 Gb/s serial speed keeps SCSI command-set reliability
  • 50 cm length fits tight chassis routing
  • Replaces legacy parallel SCSI with flexible serial link

Cable configuration

This cable combines a 15-pin SATA power plug, a 29-pin SAS SFF-8482 connector and a 7-pin SATA-style SAS port in a single 50 cm assembly. It is built for technicians who need to attach a SAS drive to a system that supplies SATA power and a SATA-style SAS data header.

Setup verification

Confirm that the target drive uses a 29-pin SAS SFF-8482 interface and that the host provides both a 15-pin SATA power connector and a compatible 7-pin SATA-style SAS data port. The 50 cm length limits placement to drives mounted close to the motherboard or backplane, so measure the internal routing path before ordering.

Build and daily use

Moulded connectors and shielded wiring support 6 Gb/s serial transfer while preserving the SCSI command set. The unified cable reduces clutter compared to separate power and data leads, and the fixed 50 cm reach suits tight chassis layouts where longer runs would obstruct airflow or panel closure. Buyers needing to connect drives with standard SATA data ports or those requiring longer cable runs should select a different assembly.

Highlights

  • Combines 15-pin power and 29-pin SAS into one cable
  • 29-pin SFF-8482 connects to 7-pin SATA-style SAS port
  • 6 Gb/s serial speed keeps SCSI command-set reliability
  • 50 cm length fits tight chassis routing
  • Replaces legacy parallel SCSI with flexible serial link

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include both the 15-pin power and 29-pin SAS connectors, or must the power connector be purchased separately?

The cable has a 15-pin male SATA power connector and a 29-pin SAS SFF-8482 connector built in, so no separate power cable is required.

Should I choose a different length or connector style for my SAS drive?

This model is a 50cm cable with a 7-pin SATA-style SAS connector on the drive end and a 29-pin SAS SFF-8482 connector on the controller end; other lengths or styles are not covered by this listing.

Will the 6Gb/s rating deliver full speed when the cable is installed in my server?

The cable supports a 6Gb/s serial interface, so it will not limit a 6Gb/s SAS drive or controller when connected correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in SCSI / SAS / InfiniBand Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.