We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Mini-SAS to SAS-A cable, 33.8 inches, male-to-male connectors, shielded copper construction

DELL

DELL JXNPP Mini-SAS to SAS-A Cable 33.8 Inches 6Gbps

SKU CH-HPSJ-A2EJ7

Connects a Dell PowerEdge C2100 motherboard to its SAS-A backplane for 6Gbps SAS and SATA storage communication

  • TypeMini-SAS to SAS
  • ColorBlack
  • Length860mm (33.8 inches)
  • Connector Number2
  • Connector DetailMini-SAS (SFF-8087) to SAS-A Backplane
  • Terminal GenderMale-to-Male
  • Genuine Dell OEM part guarantees server compatibility
  • Mini-SAS (SFF-8087) to SAS-A connects motherboard to backplane
  • Supports SAS & SATA drives at up to 6Gbps
  • 8 inch length fits Dell PowerEdge C2100 chassis
  • Durable shielded copper construction reduces signal interference

Dell PowerEdge C2100 Server Cable

This genuine OEM cable connects the motherboard to the backplane inside Dell PowerEdge C2100 servers. It uses a Mini-SAS (SFF-8087) connector on one end and a SAS-A backplane connector on the other. The 33.8 inch length suits the chassis routing for this specific server model. Shielded copper conductors maintain signal integrity for storage traffic.

Suits C2100 storage maintenance or upgrades

IT technicians replacing a failed cable or adding drive bays in a PowerEdge C2100 will find the correct factory fit here. Builders working on other server platforms or generic enclosures cannot use the proprietary SAS-A backplane interface. The fixed 860mm length also prevents use in shorter or longer routing paths.

Mini-SAS (SFF-8087) to SAS-A connector pairing

This specific connector combination is the single specification that decides compatibility. The cable carries SAS and SATA signals at 6Gbps between the motherboard Mini-SAS port and the SAS-A backplane. Verify your C2100 backplane uses the SAS-A interface before ordering.

Highlights

  • Genuine Dell OEM part guarantees server compatibility
  • Mini-SAS (SFF-8087) to SAS-A connects motherboard to backplane
  • Supports SAS & SATA drives at up to 6Gbps
  • 8 inch length fits Dell PowerEdge C2100 chassis
  • Durable shielded copper construction reduces signal interference

Specifications

BrandDELL
ModelJXNPP
TypeMini-SAS to SAS
ColorBlack
Length860mm (33.8 inches)
Connector Number2
Connector DetailMini-SAS (SFF-8087) to SAS-A Backplane
Terminal GenderMale-to-Male
SpeedSupports SAS 6Gbps and SATA 6Gbps
Shieldingyes
Conductorcopper
ConstructionHigh-quality, durable shielding for server use
FeaturesDesigned specifically for Dell PowerEdge C2100 servers
Ensures fast and reliable SAS/SATA storage communication
OEM Dell part ensures compatibility and reliability

Questions about this item

What connectors are on the cable and do I need any extra adapters?

The cable has a Mini-SAS (SFF-8087) plug on one end and a SAS-A backplane plug on the other, both male. No extra adapters are required for a direct motherboard-to-backplane link.

My server uses 6 Gbps SAS drives — is this the right length and speed?

Yes. The cable is rated for SAS 6Gbps and SATA 6Gbps and measures 33.8 inches (860 mm), matching the Dell PowerEdge C2100 chassis routing.

Will the 6 Gbps rating actually be reached inside a PowerEdge C2100?

The cable is shielded and built to the SAS 6Gbps spec, so it will deliver the full 6 Gbps per lane when paired with a compatible controller and backplane in the C2100.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.