We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda USB 3.0 20pin to USB 2.0 9pin Adapter Cable 4 inches

SKU CH-KMXA-QRWQ9

Connects a USB 2.0 9-pin device to a USB 3.0 20-pin motherboard header with a 4 inch cable at 480 Mbps

  • Connect USB 2.0 9-pin devices to USB 3.0 20-pin motherboard headers
  • Achieve 480 Mbps data transfer speeds meeting USB 2.0 specification
  • Support USB 2.0 10-pin devices on USB 3.0 motherboard connectors
  • Compact 4-inch cable length fits tight internal spaces
  • Black adapter cable converts USB 3.0 20-pin female to USB 2.0 9-pin male

USB 3.0 20-pin to USB 2.0 9-pin adapter

This adapter cable connects a USB 2.0 9-pin header device to a USB 3.0 20-pin motherboard header. It converts the physical interface so older front-panel or drive-bay devices can be used on newer boards. The cable is four inches long and coloured black. Data transfer operates at up to 480 Mbps under the USB 2.0 specification.

Suits builders adding legacy front-panel ports

The adapter is intended for installations where a case or accessory provides only a 9-pin USB 2.0 connector. It does not increase the signalling rate beyond USB 2.0 speeds. Builders who need full USB 3.0 throughput for their front-panel ports should look for a native 20-pin header or a different solution.

Simple internal connection with no drivers required

Installation consists of plugging the 20-pin female end onto the motherboard header and the 9-pin male end into the device cable. The short four-inch length limits routing options in larger cases. Ensure the keyed connectors are aligned before applying force to avoid bent pins.

Highlights

  • Connect USB 2.0 9-pin devices to USB 3.0 20-pin motherboard headers
  • Achieve 480 Mbps data transfer speeds meeting USB 2.0 specification
  • Support USB 2.0 10-pin devices on USB 3.0 motherboard connectors
  • Compact 4-inch cable length fits tight internal spaces
  • Black adapter cable converts USB 3.0 20-pin female to USB 2.0 9-pin male

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need a USB 3.0 20-pin header for this adapter?

Yes, the female 20-pin connector plugs directly into a USB 3.0 20-pin motherboard header.

Will my USB 2.0 9-pin front-panel run at USB 3.0 speed with this cable?

No, the link is limited to USB 2.0 specification at 480 Mbps.

How do I confirm the adapter is passing data correctly after fitting it?

Connect a USB 2.0 device to the front panel and verify it appears in the OS at 480 Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.