We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white 180-degree U-turn 8-pin PCIe GPU power adapters with aluminum shield design

Vszerda

Vszerda Shield Series 8-Pin PCIe GPU Power Adapter 180-Degree U-Turn White 2-Pack

SKU CH-MKM4-HH0RN

White 180-degree U-turn 8-pin PCIe power adapters with aluminium heat-dissipating shells, sold as a pair

  • Shield-inspired design adds visual appeal to builds
  • Aluminum housing with venting channels improves heat dissipation
  • 180-degree U-turn connector eases routing in tight spaces
  • New terminals maintain stable power under full load
  • Optimised cable management boosts internal airflow

180-degree GPU power adapter

This 8-pin PCIe adapter redirects the power cable with a 180-degree U-turn to clear tight clearances around graphics cards. The white aluminium housing adds a clean visual accent while integrated venting channels help dissipate heat from the connector. Two adapters are included for multi-GPU setups or spare inventory.

Replaces straight 8-pin plugs

Standard straight connectors often press against side panels or adjacent cards, risking bent pins and restricted airflow. The angled design removes that mechanical stress and suits builds where the GPU sits close to the case window or a sound-dampening panel. The upgrade is worthwhile whenever cable routing forces a sharp bend at the stock connector.

Limited to 8-pin PCIe devices

The adapter only fits components with a standard 8-pin PCIe power socket and cannot be used with 6-pin, 12VHPWR or proprietary connectors. Orientation is fixed at 180 degrees, so builders needing a 90-degree turn or reverse-facing layout must choose a different variant. No active electronics are present; the device simply reroutes the existing power lines.

Highlights

  • Shield-inspired design adds visual appeal to builds
  • Aluminum housing with venting channels improves heat dissipation
  • 180-degree U-turn connector eases routing in tight spaces
  • New terminals maintain stable power under full load
  • Optimised cable management boosts internal airflow

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 180-degree U-turn connector need behind the graphics card?

The 180-degree U-turn bends the cable back toward the motherboard, so allow enough space behind the GPU's 8-pin socket for the aluminium housing to sit without pressing against the side panel.

Which way do I line up the 180-degree U-turn so the cable routes toward the motherboard?

Match the adapter's keyed 8-pin plug to the GPU socket, press straight in until the latch clicks, then route the tail toward the motherboard tray; the U-turn only fits one way.

Do the aluminium vented housings need any cleaning or replacement over time?

The aluminium housings are passive and have no moving parts; occasional dusting with compressed air keeps the venting channels clear, and no scheduled replacement is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.