We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe 3.0 riser cable with vertical GPU bracket for Lancool II case

Lian Li

Lian Li LAN2-1X PCIe 3.0 Riser Cable 200mm Vertical GPU Bracket

SKU CH-PQRR-JQ8GX

Vertically mounts a graphics card in a Lancool II case with a 200 mm PCIe 3.0 riser cable while leaving room for two 120 mm fans beneath

  • ColorBlack
  • Vertical GPU mounting in LANCOOL II cases
  • PCIe 3.0 riser cable supports up to 8 Gbps
  • 200 mm cable enables flexible vertical installation
  • Room for two 120 mm fans under vertical card
  • Compatible with PCIe 2.0 and 3.0 motherboards

Vertical GPU mounting kit for LANCOOL II cases

The Lian Li LAN2-1X combines a 200 mm PCIe 3.0 x16 riser cable with a dedicated bracket that lets you install a graphics card vertically in a LANCOOL II or LANCOOL II Mesh chassis. The black cable supports PCIe 2.0 and 3.0 signalling at up to 8 Gbps, preserving full bandwidth for high-end GPUs. A cut-out in the bracket maintains clearance for two 120 mm fans mounted beneath the card, keeping airflow unobstructed.

Riser cable and bracket enable vertical display

The included 200 mm riser routes the x16 connection from the motherboard to the vertical bracket without sharp bends, while the bracket secures the card parallel to the side panel. This arrangement showcases the GPU’s design and backplate through a tempered-glass window. Builders using a PCIe 4.0 motherboard and GPU must set the slot to Gen 3 in the BIOS for stable operation with the supplied cable.

Suits LANCOOL II owners wanting a showcase build

This kit is for LANCOOL II or LANCOOL II Mesh owners who want a vertical GPU layout with room for intake fans below the card. It does not fit other cases, and the 200 mm cable length is fixed for that chassis. Builders who need a longer riser, PCIe 4.0 throughput without BIOS changes, or a horizontal mounting option should look at alternative solutions.

Highlights

  • Vertical GPU mounting in LANCOOL II cases
  • PCIe 3.0 riser cable supports up to 8 Gbps
  • 200 mm cable enables flexible vertical installation
  • Room for two 120 mm fans under vertical card
  • Compatible with PCIe 2.0 and 3.0 motherboards

Specifications

ColorBlack

Questions about this item

Will the 200 mm PCIe 3.0 riser cable need replacing if I upgrade to a PCIe 4.0 graphics card?

The cable is rated for PCIe 3.0 speeds up to 8 Gbps; running a PCIe 4.0 GPU requires setting the motherboard slot to Gen 3 in BIOS, so the cable itself does not need replacement but will limit the link to 3.0 bandwidth.

What thermal limit appears first when the GPU runs vertically under sustained load?

The bracket positions the card above two 120 mm fan mounts, letting unrestricted airflow reach the GPU cooler; the first limit will be the graphics card's own thermal throttle point, not the bracket.

How much extra noise or heat does the 200 mm riser add during all-day operation?

The passive riser cable adds no active cooling or moving parts, so it contributes no measurable noise or heat; system acoustics and thermals remain those of the GPU and case fans alone.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.