We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 180-degree 8-pin PCIe power adapters with aluminum shield finish

Vszerda

Vszerda Shield Series 180° 8-Pin PCIe Power Adapter Reverse Black 2-Pack

SKU CH-YEWY-FAC07

An 180-degree U-turn 8-pin PCIe GPU power adapter with an aluminium shield design and thermal venting, supplied as a two-pack

  • Shield-inspired design adds visual harmony to builds
  • 180-degree U-turn connector eases routing in tight cases
  • Aluminium housing with vent channels improves heat dissipation
  • New terminals maintain stable contact under sustained full load
  • Two adapters included for dual-connector graphics cards

Shield-style 180° PCIe adapter

The Vszerda Shield Series 180° 8-Pin PCIe Power Adapter is an internal cable accessory designed for PC builders who need to route power to a graphics card in tight spaces. Its reverse-orientation connector and U-turn angle help align the cable cleanly against the PCB or side panel. The two-pack provides spares for dual-card setups or future upgrades. Aluminum housing adds structural rigidity and a cohesive look inside the case.

180-degree U-turn constraint

The adapter uses a fixed 180-degree bend that directs the cable back along the connector axis, which only works when clearance behind the GPU matches that exact trajectory. If the case side panel, drive cage or motherboard components sit closer than the bend radius allows, the connector will not seat fully. The alternative 90-degree variant exists for different routing needs but is a separate product; this unit cannot be re-angled after purchase.

Reverse-type 8-pin orientation

The decisive specification is the RVS (reverse) pin orientation on the 8-pin PCIe plug, which mirrors the standard layout so the latch and keying face the opposite direction. Only graphics cards or devices wired for that reverse pinout will accept the connector without forcing it; standard-orientation ports are physically incompatible. Verify the GPU power socket marking before ordering, as no adapter can change the pin order once moulded.

Highlights

  • Shield-inspired design adds visual harmony to builds
  • 180-degree U-turn connector eases routing in tight cases
  • Aluminium housing with vent channels improves heat dissipation
  • New terminals maintain stable contact under sustained full load
  • Two adapters included for dual-connector graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 180-degree reverse version or the 90-degree standard version?

Choose the 180-degree reverse adapter when the GPU power socket faces the side panel and the cable must bend back toward the motherboard; choose the 90-degree standard adapter when the socket faces the motherboard and the cable needs to run parallel to the card.

How does the aluminium housing affect the adapter once it is installed in a working system?

The aluminium shell acts as a heat spreader with venting channels that pull warmth away from the connector terminals, keeping the joint cooler during sustained loads.

What does the 8-pin PCIe interface limit in a real build?

The 8-pin PCIe plug is the sole power path, so the graphics card cannot draw more current than that single connector allows.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.