We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black NVME M-Key adapter board with two USB 3.1 Type-E headers

BUCIER

BUCIER NVME M-Key to 2 USB 3.1 Type-E Adapter

SKU CH-ZJEF-317JG

Converts an NVME M-Key slot into two USB 3.1 Type-E headers for front-panel ports, requiring no extra attachments

  • ColorBLACK NVME CARD 2 USB 3.1 Type-E
  • Adds two USB 3.1 Type-E headers using a spare NVME M-Key slot
  • Converts an internal M-Key connector into front-panel USB 3.1 connectivity
  • Works without a native USB 3.1 header on the motherboard
  • Compact plug-in design needs no extra cables or brackets
  • Delivers up to 10 Gbit/s bandwidth per port

M-Key to dual USB 3.1 adapter

This BUCIER adapter converts a motherboard NVME M-Key slot into two USB 3.1 Type-E headers. It enables front-panel USB 3.1 connectivity on chassis that lack a matching mainboard header. The compact plug-in design requires no extra cables or mounting hardware.

Sustained data throughput

The adapter bundles USB 3.1 traffic at up to 10 Gbit/s per port without active cooling. Continuous file transfers run at the interface limit rather than throttling under load. No power-delivery or video channels are present, so the link stays dedicated to data.

Interface practical limits

USB 3.1 Type-E headers cap at 10 Gbit/s and do not carry display or audio signals. The M-Key slot supplies only the PCIe lanes needed for the USB controller, so storage devices cannot share the same connector. Systems without an NVME M-Key cannot use this adapter.

Highlights

  • Adds two USB 3.1 Type-E headers using a spare NVME M-Key slot
  • Converts an internal M-Key connector into front-panel USB 3.1 connectivity
  • Works without a native USB 3.1 header on the motherboard
  • Compact plug-in design needs no extra cables or brackets
  • Delivers up to 10 Gbit/s bandwidth per port

Specifications

Brandchenyang
ModelCY-EP-020
ColorBLACK NVME CARD 2 USB 3.1 Type-E

Questions about this item

Does the BUCIER adapter draw extra power or generate heat when running all day?

The adapter converts an NVME M-Key slot into two USB 3.1 Type-E headers and requires no additional attachments, so it adds no active components that would increase power draw or heat.

What must my motherboard already have for this BUCIER adapter to work?

Your motherboard needs a free NVME M-Key slot; the adapter plugs directly into that slot and provides two USB 3.1 Type-E headers for front-panel ports.

Will the BUCIER adapter work with an older motherboard that only has USB 2.0 headers?

The adapter fits into an NVME M-Key slot and outputs USB 3.1 Type-E headers; it does not connect to legacy USB 2.0 headers, so the board must provide the M-Key slot for the adapter to function.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.