We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50cm active cable with SFF-8611 and SFF-8654 male connectors

Vszerda

Vszerda OCuLink SFF-8611 8i to SFF-8654 8i 8x Active Cable 50cm 16Gbps

SKU CH-2MD8-6YAXM

Connects an OCuLink SFF-8611 controller to an SFF-8654 backplane with 16Gbps active signalling over 50cm

  • Typetinned copper wire
  • ColorBlack
  • Length50
  • Connector Number80
  • Terminal GenderMale-to-Male
  • Speed16 gigabits_per_second
  • 16 Gbps data rate for fast SSD throughput
  • 50 cm active cable keeps signal integrity over distance
  • SFF-8611 8i to SFF-8654 8i connectors link backplane and controller
  • Reversible design works with either port as host or target
  • 80-pin tinned copper conductors with active latch for secure fit

Connectors and speed

This Vszerda active cable links an OCuLink SFF-8611 8i interface to an SFF-8654 8i interface at up to 16 Gbps. It uses tinned copper conductors and shock-resistant shielding to maintain signal quality across the 50 cm run. Both ends are male with an active latch for secure mating. The assembly is built for internal device-to-controller links in storage systems.

Who it fits and who it does not

It suits builders connecting a backplane to a RAID or HBA controller when one side presents SFF-8611 and the other SFF-8654. The cable works in either direction, so the same part covers both port layouts. It is not for external connections, nor for setups that lack a free OCuLink 8x 80-pin slot. Buyers needing a different pin count or a passive design should look elsewhere.

Deciding specification

The single figure that decides fit is the 16 Gbps data rate combined with the SFF-8611 to SFF-8654 connector pairing. If your controller and backplane match those two interfaces and can use an active 50 cm link, this cable meets the requirement. If either side uses a different connector or a lower signalling speed, the cable will not work.

Highlights

  • 16 Gbps data rate for fast SSD throughput
  • 50 cm active cable keeps signal integrity over distance
  • SFF-8611 8i to SFF-8654 8i connectors link backplane and controller
  • Reversible design works with either port as host or target
  • 80-pin tinned copper conductors with active latch for secure fit

Specifications

Brandxiwai
Typetinned copper wire
ColorBlack
Length50
Connector Number80
Terminal GenderMale-to-Male
Speed16 gigabits_per_second
Specificationstinned copper wire
Shieldingshock-resistant
Featuresshock-resistant

Questions about this item

Do I need an OCuLink 8x 80-pin interface on my controller or backplane to plug this cable in?

Yes, the cable requires a free OCuLink 8x 80-pin interface on either the controller or the backplane to function.

Can I use this SFF-8611 to SFF-8654 cable with an older SAS backplane that has an SFF-8654 connector?

The cable connects an SFF-8611 male to an SFF-8654 male, so it will physically mate with a backplane that has an SFF-8654 socket.

How can I confirm the link is running at the rated 16 Gbps after installation?

Check the controller BIOS or operating system link-status utilities; they will report the negotiated speed for the active 8x connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.