We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 slot and SATA connectors

Vszerda

Vszerda M.2 NGFF to SATA Adapter Card

SKU CH-RR9C-EHT62

Converts SATA-bus M.2 NGFF SSDs (2230-2280) to a 6.0 Gbps SATA interface for B-key and B+M-key drives

  • Converts M.2 NGFF SATA SSDs to standard 2.5" SATA 6Gbps
  • Supports B-key and B+M-key SATA M.2 modules 2230 2242 2260 2280
  • Works with SATA revision I II III at 1.5 3.0 6.0 Gbps
  • Does not support PCIe M-key or NVME AHCI drives like 950 960
  • Adds M.2 SATA SSD performance while reducing power consumption

Convert SATA M.2 drives to SATA3

This adapter converts a SATA-bus M.2 NGFF SSD into a standard SATA 6Gbps interface. It supports B-key and B+M-key drives in 2230, 2242, 2260 and 2280 form factors. Builders upgrading laptops or desktops with a spare SATA port can reuse existing M.2 SATA storage. It does not work with PCIe NVMe M-key or M+B-key SSDs.

Supports SATA I II III speeds

The card operates at SATA revision I, II and III rates of 1.5, 3.0 and 6.0 Gbps. It handles any SATA-bus M.2 drive within the listed lengths and key types. Performance tops out at the SATA 6Gbps link limit, so faster PCIe drives cannot be used and will not function. Buyers needing NVMe support must choose a different adapter.

B-key and B+M-key SATA only

The single specification that decides compatibility is the SSD key type and bus protocol. This adapter only accepts SATA-bus M.2 SSDs with B-key or B+M-key notches. It physically and electrically rejects M-key and M+B-key NVMe drives such as the Samsung 950PRO or 960EVO. Verify your drive key before purchase.

Highlights

  • Converts M.2 NGFF SATA SSDs to standard 2.5" SATA 6Gbps
  • Supports B-key and B+M-key SATA M.2 modules 2230 2242 2260 2280
  • Works with SATA revision I II III at 1.5 3.0 6.0 Gbps
  • Does not support PCIe M-key or NVME AHCI drives like 950 960
  • Adds M.2 SATA SSD performance while reducing power consumption

Specifications

No published specifications for this item yet.

Questions about this item

Will this adapter work with the SATA M.2 2280 SSD I already own?

Yes, it supports SATA-Bus B-key and B+M-key M.2 SSDs in 2230, 2242, 2260 and 2280 lengths.

How can I verify the adapter is running at the correct SATA 6Gbps speed after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6.0 Gbps for a SATA III drive.

Does the package include a SATA data cable and mounting screw, or must I buy them separately?

The adapter card is supplied alone; a standard SATA data cable and an M.2 mounting screw are required separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.