We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK Q4 USB Optical Coaxial DAC Headphone Amp Audio Adapter

SKU CH-YZ5X-7G88B

Compact USB, optical and coaxial DAC with headphone amplifier and RCA output, 160 mW into 32 Ω, 24-bit/192 kHz streaming, bass and treble controls, drives 16–200 Ω headphones

  • Plug-and-play digital audio with no driver installation required
  • Texas Instruments NE5532 op-amp delivers low-noise high-fidelity sound
  • Front-panel bass and treble knobs tailor output for music or movies
  • 160 mW RMS into 32 ohms drives headphones from 16 to 200 ohms
  • Bit-perfect 24-bit 192 kHz streaming via USB Optical or Coaxial inputs

What it is and who it's for

The BFKK Q4 is a compact desktop DAC and headphone amplifier that converts digital audio from USB, optical or coaxial sources into analogue signals for headphones or powered speakers. It targets listeners who want a simple way to upgrade computer or TV sound without installing drivers or software. Buyers who need microphone input or wireless streaming should look elsewhere.

Installation and common issues

The unit works as a true plug-and-play device on modern operating systems, so no special app or driver is required. Connect the source via USB, optical or coaxial, then attach headphones to the 3.5 mm jack or speakers through the RCA outputs. The only frequent stumbling point is forgetting that the optical and coaxial ports are inputs only, so they cannot feed an external DAC.

Capacity and headroom

The Texas Instruments NE5532 op-amp drives headphones from 16 to 200 ohms with 160 mW RMS into 32 ohms at 20 Hz–20 kHz and 0.01 % THD. Bass and treble knobs provide analogue tone control for music or movies. The DAC accepts PCM streams up to 24 bit / 192 kHz, but it does not decode DSD or MQA, so those formats will fall back to a compatible source or remain silent.

Highlights

  • Plug-and-play digital audio with no driver installation required
  • Texas Instruments NE5532 op-amp delivers low-noise high-fidelity sound
  • Front-panel bass and treble knobs tailor output for music or movies
  • 160 mW RMS into 32 ohms drives headphones from 16 to 200 ohms
  • Bit-perfect 24-bit 192 kHz streaming via USB Optical or Coaxial inputs

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the Q4 is outputting bit-perfect 24bit/192KHz audio after setup?

The Q4 streams bit-perfect 24bit/192KHz HD audio with low jitter; you can confirm operation by checking your source device's audio settings to ensure the output format matches 24bit/192KHz and listening for clear, distortion-free sound through headphones or powered speakers.

What comes in the box with the Q4 and which cables or accessories must I buy separately?

The Q4 unit includes PC-USB, Optical, and Coaxial inputs with RCA and 3.5 mm headphone outputs built in; you will need to supply your own USB, Optical, or Coaxial cables to connect your source, plus RCA cables for powered speakers or an amplifier if not already owned.

Which Q4 version should I choose for driving 32 ohm headphones versus connecting to powered speakers?

The single Q4 model handles both uses: its headphone amp drives 16–200 ohm loads and delivers 160mW RMS into 32 ohms at 0.01% THD, while the RCA outputs feed powered speakers or an external amplifier for desktop listening.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.