Vszerda
Vszerda HDMI Switch Splitter 2x4 Audio Extractor 4K@60Hz Remote
Routes two HDMI sources to four displays at 4K 60 Hz while extracting audio to optical, 3.5 mm and HDMI simultaneously
- Connect two sources to four displays
- Switch inputs via IR remote or front button
- Extract audio through optical, 3.5 mm and HDMI simultaneously
- Pass 4K at 60 Hz with HDR and 4:4:4 colour
- Downscale 4K to 1080p on each output independently
2×4 HDMI Switch with Audio Extraction
This Vszerda unit connects two HDMI sources to four displays simultaneously, supporting 4K at 60 Hz with HDR and RGB 4:4:4 colour. An IR remote and a front-panel button let you select the active input without leaving your seat. HDCP 2.2 and HDMI 2.0b compliance ensure compatibility with protected 4K content.
Upgrade from Basic Splitters or Manual Swapping
Unlike passive splitters that mirror one source everywhere, this switcher routes either of two inputs independently to all four outputs. The jump is worth it when you need to share a games console and a media player across multiple screens without re-plugging cables. Integrated downscaling lets a 4K source feed 1080p displays at the same time.
Check Your Cables and Audio Needs
Verify that your HDMI cables are rated for 18.5 Gbps to maintain 4K 60 Hz over runs up to 10 metres, or 20 metres for 1080p. The box provides optical TOSLINK, 3.5 mm analogue and HDMI audio outputs simultaneously, supporting LPCM, Dolby and DTS 5.1 formats. Ensure your sink devices accept the audio format you plan to use.
Highlights
- Connect two sources to four displays
- Switch inputs via IR remote or front button
- Extract audio through optical, 3.5 mm and HDMI simultaneously
- Pass 4K at 60 Hz with HDR and 4:4:4 colour
- Downscale 4K to 1080p on each output independently
Specifications
No published specifications for this item yet.
Questions about this item
How far can I run a 4K@60Hz HDMI cable from the 2x4 splitter outputs?
Up to 10 metres using AWG26 standard HDMI cable for 4K@60Hz signals.
Do I need to press the switch button on the unit or use the IR remote to change the active input?
Either works — press the switch button on the device or use the included IR remote to select one of the two HDMI inputs.
Will the optical TOSLINK and 3.5 mm jack need separate audio cables if I want both at once?
Yes, connect an optical cable to the TOSLINK port and a 3.5 mm stereo cable to the headphone jack; both carry audio simultaneously.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



