We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI ports and audio outputs, remote included

Vszerda

Vszerda HDMI Switch Audio Extractor 2×1 4K@60Hz ARC

SKU CH-SC1P-EDHGK

Connects two HDMI 2.0 sources to one display at 4K 60 Hz and extracts audio via optical, coaxial, RCA and 3.5 mm outputs with ARC support

  • Switch two 4K sources to one display at 60 Hz
  • Extract audio via optical, coaxial, RCA and 3.5 mm outputs
  • Supports 5.1 surround through optical and coaxial connections
  • ARC function sends TV audio back to a sound system
  • 2 Gbps bandwidth with HDCP 2.2 and RGB 4:4:4

2×1 HDMI Switch with Audio Extraction

This Vszerda HDMI switch connects two HDMI 2.0 sources to a single display and extracts audio through optical Toslink, coaxial, RCA stereo and a 3.5 mm jack. It supports 4K resolution at 60 Hz with 36-bit deep colour and a maximum bandwidth of 18.2 Gbps. HDCP 2.2 compliance and ARC functionality are included for modern home-theatre setups.

Suited for multi-source setups needing audio

Buyers who want to route a PS5, set-top box or similar HDMI device to one screen while sending sound to a soundbar or amplifier will find the three audio modes useful. The switch handles 2.1-channel stereo and 5.1-channel digital surround via optical or coaxial outputs. It is not for installations that require DVI compatibility or more than two input ports.

18.2 Gbps bandwidth at 4K 60 Hz

The 18.2 Gbps ceiling decides whether high-frame-rate 4K content passes without compression. Sources and cables must meet the HDMI 2.0b specification to use the full 60 Hz refresh rate and RGB 4:4:4 sampling. If the source only delivers 4K at 30 Hz or 1080p, the switch will still operate but cannot exceed its rated bandwidth.

Highlights

  • Switch two 4K sources to one display at 60 Hz
  • Extract audio via optical, coaxial, RCA and 3.5 mm outputs
  • Supports 5.1 surround through optical and coaxial connections
  • ARC function sends TV audio back to a sound system
  • 2 Gbps bandwidth with HDCP 2.2 and RGB 4:4:4

Specifications

No published specifications for this item yet.

Questions about this item

What HDMI sources and display do I need to connect this 2×1 switch?

You need two HDMI 2.0 sources such as a PS5 or cable box and one display with an HDMI input; the switch accepts both sources and routes the chosen signal to the single output at up to 4K@60Hz.

Will my older 1080p monitor work with this 4K@60Hz switch?

Yes, the switch is backward compatible with 1080p and 4K@30Hz signals, so a 1080p monitor will display the selected source without any extra configuration.

How can I verify the audio extractor is passing 5.1 surround to my soundbar?

Set the mode switch to 5.1CH, connect the optical or coaxial output to the soundbar, and confirm the soundbar indicates a Dolby Digital 5.1 or DTS 5.1 bitstream while playing compatible content.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.