We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black Cat 7 ethernet cable with gold RJ45 connectors, 30 m length

Vszerda

Vszerda Cat 7 flat network ethernet cable 10 Gbps 30 m black

SKU CH-GKH6-SMPY7

A flat Cat 7 patch cable with 32 AWG bare-copper conductors, gold-plated RJ45 connectors and 600 MHz bandwidth for 10 Gbps runs up to 30 m

  • Supports 10 Gbps data rates with 600 MHz bandwidth
  • Flat 30 m design runs under carpet and along walls
  • 100 % bare copper conductors reduce noise and interference
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • Backward compatible with Cat 5 through Cat 6A networks

Flat Cat 7 cable for home and office

This 30 metre flat Cat 7 cable uses 100 percent bare copper conductors and gold-plated RJ45 connectors to deliver up to 10000 Mbps bandwidth at 600 MHz. The slim profile slips under carpets and along skirting boards without tangling, making it practical for renters and permanent installs alike. It suits gaming consoles, PCs, NAS devices, VoIP phones and any device with an 8P8C port. The 32 AWG multi-strand construction stays flexible during routing.

Upgrade from older Cat 5 or Cat 6 patch cords

Replacing a Cat 5, Cat 5e, Cat 6 or Cat 6A patch cord with this Cat 7 link raises the usable bandwidth ceiling to 10 Gigabit per second and adds SSTP shielding for lower crosstalk. The jump is worth it when your switch, router or NAS already supports 10 GbE and you need the headroom for 4K streaming, cloud backups or competitive gaming. If your network gear tops out at 1 Gigabit, the extra specification will not increase throughput.

Sustained throughput with shielded pairs

The four shielded twisted pairs and 32 AWG conductors maintain signal integrity over the full 30 metre run, so long transfers such as server replication or video surveillance archives stay at line rate without retries. Gold-plated contacts and moulded strain-relief boots resist corrosion and cable fatigue during repeated reconnects. The flat geometry also reduces pressure points that can degrade performance when the cable is pinned under carpet or furniture.

Highlights

  • Supports 10 Gbps data rates with 600 MHz bandwidth
  • Flat 30 m design runs under carpet and along walls
  • 100 % bare copper conductors reduce noise and interference
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • Backward compatible with Cat 5 through Cat 6A networks

Specifications

No published specifications for this item yet.

Questions about this item

What is the wire gauge and connector type on this 30 m flat Cat 7 cable?

The cable uses 32 AWG multi-strand conductors and terminates in gold-plated RJ45 (8P8C) connectors with molded strain-relief boots and snagless molds.

How do I route the flat cable under carpet and through doorways without damaging the connectors?

Feed the slim flat profile under carpet or along baseboards; the snagless boot protects the latch, but avoid sharp bends tighter than the cable's natural curve to prevent conductor stress.

Will the gold-plated contacts need cleaning or the cable need replacement after extended PoE or 10 Gbps use?

Gold plating resists corrosion, so contacts rarely need cleaning; the bare copper 32 AWG conductors are rated for 600 MHz bandwidth and 10 Gbps throughput, so replacement is only necessary if the jacket or connectors suffer physical damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.