Vszerda
Vszerda Basic Sleeved Extension Cable Kit White 30cm
A white sleeved extension kit with ATX 24-pin, EPS 4+4-pin and dual PCI-E cables, each 30 cm long using UL 1007 18 AWG wire
- Clean cable routing with 30 cm extensions
- Professional white-sleeved look for visible runs
- Reliable power delivery via UL 1007 18AWG wire
- Complete kit covers ATX 24Pin EPS 4+4Pin and PCI-E 6+2Pin 6Pin
- Durable nylon sleeve protects each conductor
White Sleeved Extension Cable Kit
This kit adds four white-sleeved power extensions to a desktop build: a 24-pin ATX, a 4+4-pin EPS, a 6+2-pin PCIe and a 6-pin PCIe cable. Each lead uses UL 1007 18AWG wire under a single nylon sleeve and measures 30 cm or 11.8 in. The set targets builders who want a clean, uniform look on the most visible cables without replacing the PSU loom.
Who This Suits and Who It Does Not
The kit suits systems where the graphics card requires one 6-pin and one 8-pin connector and the motherboard uses a standard 24-pin ATX plus 4+4-pin EPS header. Builds needing extra PCIe connectors, longer runs for large cases, or individually sleeved wires instead of a single sleeve will not be served by this package.
Deciding Specification: 30 cm Fixed Length
Every cable in the kit is exactly 30 cm long, so the distance between your power supply and each component must fit within that reach. Measure the routing path before buying; if the PSU sits far from the motherboard or GPU, the extensions will fall short.
Highlights
- Clean cable routing with 30 cm extensions
- Professional white-sleeved look for visible runs
- Reliable power delivery via UL 1007 18AWG wire
- Complete kit covers ATX 24Pin EPS 4+4Pin and PCI-E 6+2Pin 6Pin
- Durable nylon sleeve protects each conductor
Specifications
No published specifications for this item yet.
Questions about this item
Which existing cables must my power supply already have for this kit to connect?
Your PSU must provide a 24-pin ATX, a 4+4-pin EPS and both a 6+2-pin and a 6-pin PCIe connector.
Will these 30 cm extensions reach cleanly if I keep my current ATX mid-tower case?
The 30 cm length adds modest reach inside a standard mid-tower; measure your existing cable runs to confirm the extra distance is sufficient.
How can I verify the 18 AWG wires are seated correctly after installation?
Check that every 24-pin, 4+4-pin, 6+2-pin and 6-pin connector clicks fully into its socket and that the white nylon sleeving shows no kinks or exposed wire.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ATEN VC980 Mini DisplayPort to HDMI audio video converter
- Mini DP to HDMI
- White



