We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sleeved 8-pin PCIe splitter cable, one female to two 6+2 male connectors, 33 cm long

Vszerda

Vszerda 8 Pin PCIe Splitter Cable internal power cable

SKU CH-P6HY-ZACFZ

Adds two 8-pin (6+2) GPU power connectors from one PSU 8-pin cable, 33 cm sleeved 18 AWG wire

  • Adds two GPU power ports from one PSU connector
  • 8-pin female to dual 8-pin (6+2) male ends
  • Works with non-modular and semi-modular PSUs
  • Fits 6-pin or 8-pin graphics cards
  • 13-inch sleeved cable with 18AWG wire

Splitter Cable for Non-Modular PSUs

This Vszerda 8-pin PCIe splitter adds two 6+2-pin connectors to a single 8-pin male cable from a non-modular or semi-modular power supply. The 13-inch sleeved assembly uses 1007-18AWG copper wire and includes a hook-and-loop strip for tidy routing inside the case. It is designed for builders who need extra GPU power ports without replacing the PSU.

Upgrade Path for Dual-GPU Power

The adapter replaces the need for a second native PCIe cable when a graphics card requires two 8-pin inputs but the PSU only provides one. The jump is worth it when the existing unit has sufficient wattage and the single 8-pin rail can deliver the combined load safely. It does not work with fully modular power supplies because there is no fixed 8-pin male lead to accept the female end.

Build Integration and Constraints

The 33 cm length reaches most mid-tower GPU positions while the 6+2-pin ends slide to fit either 6-pin or 8-pin sockets on cards from brands such as Radeon. The splitter occupies one PCIe cable from the PSU and frees the second native cable for other components. Builders using fully modular units must source a different solution because the female connector cannot mate with modular PSU sockets.

Highlights

  • Adds two GPU power ports from one PSU connector
  • 8-pin female to dual 8-pin (6+2) male ends
  • Works with non-modular and semi-modular PSUs
  • Fits 6-pin or 8-pin graphics cards
  • 13-inch sleeved cable with 18AWG wire

Specifications

No published specifications for this item yet.

Questions about this item

Will the 13-inch 1007-18AWG cable reach my GPU in a mid-tower case?

The total length including connectors is 13 inches (33 cm), which typically spans from a bottom-mounted PSU to a top-slot graphics card in most mid-tower builds.

How do I connect the 8-pin female end to my non-modular PSU without forcing the latch?

Align the 8-pin female connector with the PSU's PCIe 8-pin male cable, press straight in until the latch clicks, and avoid angling the plug which can bend the 18 AWG pins.

When should I replace the included hook-and-loop strip during a rebuild?

Replace the strip if the hook side no longer grips the loop side firmly, or if the adhesive backing peels away from the cable sleeve after repeated adjustments.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.