We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 25-Inch 24(20+4) Pin ATX to 14-Pin + 10-Pin internal power cable

SKU CH-NRNJ-JQPPY

25-inch 18AWG cable converts a 24-pin ATX connector to 14-pin plus 10-pin plugs for Corsair HXi series power supplies

  • 25-inch 18AWG cable reaches distant motherboard headers
  • 24-pin (20+4) male plugs into standard ATX supply
  • Splits to 14-pin plus 10-pin for Corsair HXi units
  • Black sleeved construction protects wires inside the case
  • Supports HX1200i HX1000i HX850i HX750i power supplies

ATX-to-HXi adapter for modular PSUs

This 25-inch cable converts a standard 24-pin ATX motherboard connector into the 14-pin plus 10-pin interface used by Corsair HXi-series power supplies. It targets builders who are fitting an HX1200i, HX1000i, HX850i or HX750i unit into a system with a regular ATX board.

18AWG conductors handle rated current

The 18AWG wire gauge is specified for the power levels these supplies deliver. Black sleeving protects the conductors from abrasion and helps routing stay tidy without adding bulk that traps heat.

Fixed 63cm length suits typical layouts

At 63 centimetres the cable reaches most motherboard sockets from a bottom- or top-mounted PSU without excess slack. The 20+4, 14-pin and 10-pin male plugs are keyed, so incorrect insertion is prevented during assembly.

Highlights

  • 25-inch 18AWG cable reaches distant motherboard headers
  • 24-pin (20+4) male plugs into standard ATX supply
  • Splits to 14-pin plus 10-pin for Corsair HXi units
  • Black sleeved construction protects wires inside the case
  • Supports HX1200i HX1000i HX850i HX750i power supplies

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 24-pin ATX side to my Corsair HX1200i, and what step do people miss?

Plug the 20+4 pin male connector into the PSU’s 24-pin socket, then attach the 14-pin and 10-pin male ends to the motherboard; the step often missed is seating both the 14-pin and 10-pin plugs fully so every pin makes contact.

What upkeep will the 18AWG sleeved cable need over time?

Inspect the black sleeving and 18AWG wires periodically for abrasion or kinks near the 14-pin and 10-pin connectors; replace the cable if insulation shows wear or pins become loose.

At what point does the 25-inch length become a limitation in a large build?

The 25-inch (63 cm) reach limits routing in full-tower cases where the PSU sits far from the 24-pin ATX header, forcing tight bends that stress the 18AWG conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.