We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black-sleeved 16-pin 12+4 right-angle connector splitting to three 8-pin PCIe plugs, 15 cm length

Vszerda

Vszerda 16-pin to 3×8-pin PCIe 5.0 12VHPWR 600 W 90° Type A 15 cm

SKU CH-X9K6-CMD44

A 15 cm PCIe 5.0 adapter that connects three 8-pin PSU cables to a single 16-pin 12VHPWR graphics card connector, rated for 600 W with a 90° right-angle Type A plug

  • Delivers up to 600 W through 16 AWG tinned copper for stable GPU power
  • Right-angle 90° 12+4-pin connector reduces strain on the graphics card port
  • PCIe 5.0 12VHPWR adapter converts three 8-pin PSU cables to one 16-pin GPU plug
  • Designed for RTX 4090 4080 3090 Ti 4070 Ti cards with Type-A orientation
  • Compact 15 cm black-sleeved length keeps cable routing tidy inside the case

Power adapter for RTX 40-series cards

This Vszerda cable converts three 8-pin PCIe power connectors into a single 16-pin 12VHPWR plug. It targets builders installing an RTX 4090, 4080 or 4070 Ti who need a right-angle Type A orientation. The 15 cm length keeps routing tidy inside compact cases. Black sleeving matches modern aesthetics.

Sustained 600 W delivery through 16 AWG wire

Sixteen-gauge tinned copper conductors carry up to 600 W continuously without the voltage sag seen on thinner adapters. Alloy copper terminals resist oxidation so contact resistance stays low over months of heavy gaming or compute loads. The 90-degree bend reduces strain on the GPU socket during thermal cycling.

Replaces daisy-chain or dual 8-pin cables

If your power supply lacks a native 12VHPWR output, this adapter replaces the makeshift daisy-chain cables that often melt under load. The jump is worth it when you run an RTX 3090 Ti or 40-series card at full power and need three dedicated 8-pin ports on the PSU side. It will not work with fewer than three connectors.

Highlights

  • Delivers up to 600 W through 16 AWG tinned copper for stable GPU power
  • Right-angle 90° 12+4-pin connector reduces strain on the graphics card port
  • PCIe 5.0 12VHPWR adapter converts three 8-pin PSU cables to one 16-pin GPU plug
  • Designed for RTX 4090 4080 3090 Ti 4070 Ti cards with Type-A orientation
  • Compact 15 cm black-sleeved length keeps cable routing tidy inside the case

Specifications

No published specifications for this item yet.

Questions about this item

Does the 16 AWG cable run hot when the GPU draws the full 600 W all day?

The 16 AWG tinned-copper conductors are rated for 600 W continuous output, so heat stays within specification during sustained loads.

My power supply only has two 8-pin PCIe connectors free — will the adapter still work?

No, the adapter requires three unoccupied 8-pin PCIe ports on the PSU; connecting fewer than three will prevent it from functioning.

Will the 90° Type A plug clear the back-plate on my RTX 4090?

The 90° right-angle Type A connector is designed to match the orientation used on RTX 4090, 4080 and 4070 Ti cards, reducing strain on the GPU port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.