OPSFALCON AYD-24Pin-S ATX 24-pin male to female extension cable 12.6in 32cm 18AWG
Extends an ATX 24-pin power supply connection by 12.6 inches with 18AWG tinned-copper wire and secure latch connectors
- TypeSATA
- ColorBlack
- Length< 1"
- Cable Length6 in.
- SpeedHeat Resistant
- SpecificationsAYD-24Pin-S, SATA, Black, 0.068 kilograms, Aiyide
- Extends ATX power reach by 12.6 inches for flexible routing
- 18AWG tinned copper conductors handle high current with low resistance
- 24-pin male to female connectors with latch prevent accidental disconnection
- Heat-resistant PVC insulation rated to 80 degrees ensures durability
- Removable cable ties included for clean cable management
Extension cable for ATX power connections
The OPSFALCON AYD-24Pin-S extends a motherboard 24-pin ATX supply link by 12.6 inches using a male-to-female layout. It suits builders fitting a PSU in a large tower where the stock cables fall short of the board socket.
Sustained load behaviour with 18AWG conductors
Thirty-four strands of 0.12 mm tinned copper per wire carry continuous current at the rated 80 degrees Celsius without overheating. The PVC insulation and heat-resistant shielding maintain stable delivery during long gaming or rendering sessions.
Installation notes and common pitfalls
Removable cable ties help route the 32 cm length cleanly, while the latch on the 5559 female connector prevents accidental release. The 20+4 pin male end fits legacy 20-pin boards, but the cable adds no extra reach for EPS or PCIe lines, so builders needing those extensions must source separate cables.
Highlights
- Extends ATX power reach by 12.6 inches for flexible routing
- 18AWG tinned copper conductors handle high current with low resistance
- 24-pin male to female connectors with latch prevent accidental disconnection
- Heat-resistant PVC insulation rated to 80 degrees ensures durability
- Removable cable ties included for clean cable management
Specifications
| Brand | OPSFALCON |
|---|---|
| Model | AYD-24Pin-S |
| Type | SATA |
| Color | Black |
| Length | < 1" |
| Cable Length | 6 in. |
| Speed | Heat Resistant |
| Specifications | AYD-24Pin-S, SATA, Black, 0.068 kilograms, Aiyide |
| Sports Team | 1 Piece |
| Connector A | 24 Pin ATX |
| Connector B | 24 Pin ATX |
| Connector Detail | 1 x eSATA to 1 x eSATA |
| Terminal Gender | Male to Female |
| Shielding | Heat Resistant |
| Construction | PVC insulation |
| Refresh Rate | 12.6 inches |
| Features | SATA, Black, OPSFALCON, AYD-24Pin-S |
| Disclaimer | RoHS |
Questions about this item
Does the 18AWG wire and 80-degree rating handle heat from a PSU running continuously?
The 18AWG tinned copper conductors and PVC insulation are rated for 80 degrees Celsius, suitable for sustained ATX power delivery inside a case.
Will the 5557 male and 5559 female connectors fit my existing ATX 2.01 motherboard and PSU?
Yes, the 24-pin (20+4) male plugs into the PSU and the 24-pin female accepts the motherboard, matching the ATX 2.01 standard.
Can I use this 12.6-inch extension with a 20-pin motherboard connector I already have?
The 24-pin female end is backward compatible with 20-pin ports, so the cable works with older 20-pin motherboards.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



