We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 16 pin 90 degree 12VHPWR GPU power adapter Type B 11mm offset

Vszerda

Vszerda 12VHPWR 90 Degree Adapter Type B 16 Pin 600W internal power cable

SKU CH-6YXS-FC6A0

A 90-degree Type B adapter connects a 12VHPWR 16-pin cable to RTX 3090 Ti, 4070 Ti, 4080 or 4090 graphics cards while supporting up to 600 W

  • Right-angle design adds 11 mm clearance for tight cases
  • 16-pin 12VHPWR connector supports 600 W power delivery
  • 12 oz copper PCB improves heat dissipation under load
  • ATX 3.0 PCIe 5.0 compatible with RTX 3090 4070 4080 4090
  • Type B orientation matches specific GPU port layouts

90 Degree 12VHPWR Adapter for RTX Cards

This 16-pin Type B adapter connects an ATX 3.0 PCIe 5.0 12+4pin cable to compatible GeForce RTX 3090 Ti 4070 Ti 4080 4090 graphics cards. The right-angle design reduces strain on the GPU input port and cable. It adds only 11mm of clearance from the card edge.

600W Rating with 12oz Copper PCB

The adapter supports up to 600W power delivery when paired with a 600W-rated source cable. A 12oz copper PCB layer acts as a heatsink to manage thermal load. It handles the full specification for supported RTX models. Insufficient source cable rating will limit safe operation.

Replaces Straight 12VHPWR Connectors

Builders upgrading from a straight 12+4pin plug gain side-panel clearance for wide cards in narrow chassis. The 90-degree orientation prevents cable wear at the GPU port. It is not for cards with a different 12VHPWR keying or orientation than Type B.

Highlights

  • Right-angle design adds 11 mm clearance for tight cases
  • 16-pin 12VHPWR connector supports 600 W power delivery
  • 12 oz copper PCB improves heat dissipation under load
  • ATX 3.0 PCIe 5.0 compatible with RTX 3090 4070 4080 4090
  • Type B orientation matches specific GPU port layouts

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12VHPWR 90 degree Type B adapter fit alongside my existing RTX 3090 Ti power cables in a tight case?

The right-angle design adds only 11 mm of clearance from the graphics card, letting the original cable route cleanly toward the side panel even in narrow chassis.

How can I confirm the 16-pin 12+4 connector is seated correctly after installing the adapter on my RTX 4080?

Push the adapter until the latch clicks and the 90-degree elbow sits flush against the GPU shroud; the short 11 mm profile leaves no gap for partial insertion.

Does the package include a 12VHPWR power cable or only the Type B 90-degree adapter for my RTX 4090?

Only the 16-pin 90-degree adapter (Type B) is supplied; you must use your PSU’s native 12VHPWR cable or a compatible 600 W PCIe 5.0 cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.