We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree 12VHPWR adapter with four 8-pin connectors and 60cm sleeved cables

Vszerda

Vszerda 12VHPWR 90° Adapter 16AWG 600W PCIe 5.0 12+4 Pin 4x8 Pin Corsair Type A

SKU CH-4C07-V6S1T

A 90-degree 12VHPWR adapter connecting four Corsair Type A 8-pin cables to RTX 3090 Ti, 4070 Ti, 4080 or 4090 graphics cards with 16 AWG wire rated for 600 W

  • 90° right-angle design reduces cable strain and clears side-panel space
  • 16AWG tinned copper conductors support up to 600W for stable GPU power
  • PCIe 5.0 12+4 pin connector fits RTX 3090 Ti, 4070 Ti, 4080 and 4090
  • Four 8-pin Corsair Type A inputs required for correct modular PSU connection
  • 60 cm length gives flexible routing inside compact chassis

90° 12VHPWR Adapter for Corsair PSUs

This 90-degree right-angle adapter connects a PCIe 5.0 12+4 pin graphics card to a Corsair modular power supply using four 8-pin PCIe cables. It is built with 16AWG tinned copper wire and rated for 600W delivery. The angled plug reduces strain on the GPU power input and creates extra clearance between the card and the side panel. Compatible with RTX 3090 Ti, 4070 Ti, 4080 and 4090 models.

Sustained 600W Delivery Through 16AWG Conductors

The 16AWG tinned copper conductors and alloy copper terminals are specified for continuous 600W operation rather than brief peaks. Four separate 8-pin connections spread the load across multiple PSU rails, keeping connector temperatures stable during extended gaming or compute sessions. The right-angle geometry prevents sharp bends that can degrade contact resistance over time.

Replaces Straight 12VHPWR Cables in Tight Builds

This adapter replaces a straight 12VHPWR cable when the case side panel sits close to the GPU power socket. The 90° turn lets the cable run parallel to the card instead of pressing against the glass. The jump is worth it for builders using wide RTX 40-series cards in compact chassis where a straight connector would kink or block the panel. Not for owners of non-Corsair power supplies or systems with fewer than four free 8-pin PCIe ports.

Highlights

  • 90° right-angle design reduces cable strain and clears side-panel space
  • 16AWG tinned copper conductors support up to 600W for stable GPU power
  • PCIe 5.0 12+4 pin connector fits RTX 3090 Ti, 4070 Ti, 4080 and 4090
  • Four 8-pin Corsair Type A inputs required for correct modular PSU connection
  • 60 cm length gives flexible routing inside compact chassis

Specifications

No published specifications for this item yet.

Questions about this item

Does the 90° angle on the 12VHPWR adapter reduce cable strain when the GPU runs under load all day?

The 90° right-angle design directs the cable away from the GPU port, lowering bend stress on the 12+4 pin connector during continuous operation.

Will the 16AWG 600W cable work with an RTX 3090 Ti that uses the older 12-pin connector?

This 12VHPWR 12+4 pin adapter is built for RTX 3090 Ti, 4070 Ti, 4080 and 4090 GPUs that accept the 16-pin PCIe 5.0 connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.