Vszerda
Vszerda DA08025B12UR 80x80x25mm 12V 0.50A 4800RPM double ball bearing 3-wire internal power cable
An 80 mm square cooling fan with double ball bearings spins at 4800 RPM on a 12 V 0.50 A three-wire lead
- Double ball bearing extends service life without maintenance
- 4800 RPM delivers strong airflow for tight spaces
- 12 V 0.50 A draws only 6 W from the PSU
- 80 × 80 × 25 mm frame fits standard 8025 mounts
- Three-wire lead supports speed monitoring and alarm signals
80 mm DC cooling fan with 3-wire lead
This 80 x 80 x 25 mm fan runs on 12 V DC and draws 0.50 A for 6 W of power. A double ball bearing supports the 4800 RPM rotation speed. The three-wire cable provides power and a tachometer signal for speed monitoring. It is built for chassis, server or inverter cooling where a compact frame is required.
Suits builds needing a standard 8025 frame
The 80 mm square footprint fits common mounting holes in industrial enclosures and server cases. The 3-wire lead allows the host system to track fan speed, which is useful for thermal management. Buyers who need PWM speed control or a 4-pin connector should look elsewhere, as this model only offers voltage regulation and a tach output.
4800 RPM at 12 V with double ball bearing
The fixed 4800 RPM rating defines the airflow and acoustic profile of this fan. The double ball bearing is rated for continuous duty and resists wear better than sleeve alternatives. If the target system requires a lower speed, a different voltage or a PWM interface, this specific model will not match those requirements.
Highlights
- Double ball bearing extends service life without maintenance
- 4800 RPM delivers strong airflow for tight spaces
- 12 V 0.50 A draws only 6 W from the PSU
- 80 × 80 × 25 mm frame fits standard 8025 mounts
- Three-wire lead supports speed monitoring and alarm signals
Specifications
No published specifications for this item yet.
Questions about this item
Will the 80 mm 12 V fan fit the same mounting holes as my existing 8025 cooler?
Yes, the 80 x 80 x 25 mm frame matches the standard 8025 footprint, so it aligns with the four corner holes used by most 80 mm chassis or server fans.
How can I confirm the 4800 RPM double ball bearing unit is running correctly after installation?
The 3-wire lead includes a tachometer signal; connect it to a motherboard or fan controller header and verify the reported speed reads near 4800 RPM under load.
Does the package include mounting screws or a Molex adapter, or must I buy them separately?
Only the fan with its attached 3-wire cable is supplied; mounting screws and any 4-pin Molex or PWM adapters are not included and must be sourced separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115473BTC
In stock
