We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of yellow carbon-steel fork extensions, 96 in long, 4.5 in inner width, powder-coated finish

VEVOR

VEVOR Pallet Fork Extensions 96" Yellow HX-6 4.2" Forks 4000 lbs

SKU CH-XKQV-5WBRH

Pair of 96-inch Q235 carbon steel fork extensions rated for 4000 lbs, fitting 4.2-inch forks with seamless welding and powder coat

  • TypeOther Appliances
  • Handle 4000 lbs with Q235 carbon steel strength
  • Fit 4.2 in forks using 4.53 in inner width
  • Resist corrosion via powder-coated one-piece welds
  • Install tool-free in seconds on forklift trucks
  • Extend reach to 96.06 in total length

Fork Extensions for 4.2 in Forks

These VEVOR pallet fork extensions are built from Q235 carbon steel and rated for 4000 lbs. They fit directly over standard 4.2 in wide forklift forks to extend reach for longer loads. The pair is finished in yellow powder coating for corrosion resistance in humid or outdoor environments. Industrial operators handling oversized pallets or bulky materials will find the 96.06 in total length useful.

Tool-Free Mounting and Fit Check

Installation is tool-free: each extension slides onto the existing forks and is secured with the built-in retaining mechanism. The inner width of 4.53 in matches 4.2 in forks, so verify your fork width before use; a wider fork will not seat properly. The one-piece welded construction eliminates loose hardware, but the 75.99 lbs weight per pair means two people or a hoist make handling easier.

4000 lb Load Capacity Decides Suitability

The decisive specification is the 4000 lb / 1.815 ton rated capacity per pair. If your loads exceed this figure, these extensions are not adequate. They are also unsuitable for forks wider than 4.2 in or for applications requiring a longer reach than 96.06 in. Buyers needing higher capacity or different fork widths must select another model.

Highlights

  • Handle 4000 lbs with Q235 carbon steel strength
  • Fit 4.2 in forks using 4.53 in inner width
  • Resist corrosion via powder-coated one-piece welds
  • Install tool-free in seconds on forklift trucks
  • Extend reach to 96.06 in total length

Specifications

TypeOther Appliances

Questions about this item

How do I confirm the fork extensions are seated correctly on my 4.2" forks after the tool-free installation?

Slide each extension onto the fork until the inner width of 4.53" fully covers the 4.2" fork; the 1.97" outer height should sit flush with the fork top and the yellow powder coat shows no gaps.

What ships in the box and is any hardware or mounting kit sold separately?

The package contains two pallet fork extensions and a user manual; installation is tool-free so no extra brackets, pins or bolts are required.

My forks are 4.2" wide — does the HX-6 model with 4.53" inner width fit, or do I need a different version?

Yes, the HX-6 is made for 4.2" forks; its 4.53" inner width and 4.92" outer width match that size exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.