We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
36 inch steel backhoe thumb with curved teeth and weld plate, powder-coated dark finish

VEVOR

VEVOR 36 inch Adjustable Weld On Backhoe Thumb heavy equipment attachment

SKU CH-VNQ0-4MQJK

A 36 inch weld-on backhoe thumb with a 1/2 inch thick tooth plate, adjustable bolt-on angle and 16 mm assembly hardware, weighing 138.0 lbs

  • TypeOther Appliances
  • 36-inch tooth plate spans wide bucket openings
  • 1/2-inch thick steel teeth grip heavy loads securely
  • Triangle-frame steel construction resists bending under stress
  • Powder-coated finish protects against rust and corrosion
  • Three-position bolt-on mounting adjusts thumb angle for varied tasks

36 Inch Adjustable Weld On Thumb

This VEVOR backhoe thumb attachment measures 36 inches across the tooth plate and is built for excavator operators who need a secure grip on irregular loads. The heavy-duty steel construction with a triangular structure provides the strength required for demolition, landscaping and material handling tasks. It is designed to be welded directly onto a compatible bucket for permanent installation.

Thermals Noise and Power Draw

As a passive mechanical attachment, this thumb generates no heat, produces no noise and draws no electrical or hydraulic power of its own. Performance depends entirely on the host machine's hydraulic system and bucket capacity. Operators should verify that their excavator can handle the additional 138.0 lbs of weight without affecting cycle times or stability.

Build Quality and Mounting Implications

The tooth plate is 1/2 inch thick and the weld plate spans 26 inches, both plasma cut for tight tolerances. A powder coated finish resists corrosion in harsh environments. The bolt on design uses three mounting holes at different positions so the thumb angle can be adjusted for various jobs, and the assembly can be removed when not needed. Bucket width must match the 26 inch weld plate before ordering.

Highlights

  • 36-inch tooth plate spans wide bucket openings
  • 1/2-inch thick steel teeth grip heavy loads securely
  • Triangle-frame steel construction resists bending under stress
  • Powder-coated finish protects against rust and corrosion
  • Three-position bolt-on mounting adjusts thumb angle for varied tasks

Specifications

TypeOther Appliances

Questions about this item

How do I align the 26 inch weld plate on my bucket before welding it in place?

Measure the bucket width and centre the 26 inch weld plate, then clamp it level so the 36 inch tooth plate sits square to the bucket edge before tack welding.

What parts will wear out first on the 1/2 inch thick tooth plate?

The tooth tips and the 16 mm assembly bolts take the most abrasion; inspect them after heavy digging and replace bolts if the threads stretch.

At what point does the bolt-on pivot become the limiting factor during continuous loading?

The three mounting holes and 16 mm bolts reach their shear limit before the 1/2 inch steel plate yields, so watch for hole elongation under sustained pry forces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.