We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red and black 49-inch spring steel hay bale spear with two black stabiliser spears and mounting sleeves

VEVOR

VEVOR 49" Hay Bale Spear 3000 lbs with Nut and Sleeve

SKU CH-GD3T-7BGYQ

A 49-inch forged spring-steel bale spear rated for 3000 lb with two stabiliser spikes, a mounting sleeve and bolt-on hardware for quick attachment to tractor or loader brackets

  • TypeOther Appliances
  • Moves bales up to 3000 lb with 49 inch forged spear
  • Heat-treated 60Si2Mn spring steel resists bending under load
  • Powder-coated finish protects against rust in wet fields
  • Bolt-on sleeve and nut fit quick-attach hooks on tractors loaders
  • Twin 17.5 inch stabilisers stop bales rolling during transport

49" Hay Bale Spear 3000 lbs Capacity

This 49-inch hay bale spear is built from high-strength 60Si2Mn spring steel for moving large bales. It supports a 3000 lb load rating and includes a powder-coated finish for corrosion resistance. The package contains the main spear with sleeve plus two black stabilizer spears. It attaches to quick-attach hookups and receiver hitches on tractors, loaders, cranes, and telehandlers.

Upgrade from lighter or shorter spears

Switching to this model makes sense when your current spear bends under heavy bales or lacks the reach to penetrate deep stacks. The 125 cm length and heat-treated spring steel resist deformation where thinner rods fail. The bolt-and-nut system speeds up attachment changes compared to pinned or welded alternatives. It is not suited for operators needing a forged alloy spear or a hydraulic auto-leveling frame.

Handles round and square bales up to 3000 lbs

The 4.5 cm diameter main spear and 3.2 cm stabilisers keep dense bales centred during transport. Two 44.5 cm stabiliser spears prevent rolling on uneven ground. The 20.3 kg gross weight adds ballast without overloading compact loader arms. Capacity runs out on oversized silage bales exceeding the 1360 kg rating or when a third stabiliser point is required for extreme side-hill work.

Highlights

  • Moves bales up to 3000 lb with 49 inch forged spear
  • Heat-treated 60Si2Mn spring steel resists bending under load
  • Powder-coated finish protects against rust in wet fields
  • Bolt-on sleeve and nut fit quick-attach hooks on tractors loaders
  • Twin 17.5 inch stabilisers stop bales rolling during transport

Specifications

TypeOther Appliances

Questions about this item

What receiver size and bolt hardware does the 49-inch spear need to mount?

The spear uses a bolt-and-nut system that fits quick-attach hookups and hitch receivers on tractors, loaders, cranes or telehandlers; the sleeve is 45# steel and the main shaft is 4.5 cm diameter.

Which step do owners most often miss when bolting on the 49-inch spear and its two 17.5-inch stabilisers?

After sliding the spear into the quick-attach hookup, the nut must be fully tightened against the sleeve so the 3000 lb capacity is secured; skipping this lets the assembly shift under load.

When should the powder-coated 60Si2Mn spring steel spear and its 1.25-inch stabilisers be inspected or replaced?

Check for coating damage, bending or cracked welds after each season; replace any spear that shows permanent deformation or corrosion that the powder coat no longer protects.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.