We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Electro-galvanised iron split-ring hanger with swivel loop, 2.3 in high, 1.6 in wide

Value Brand

Value Brand Split-Ring Hanger 2.3 in 180 lb Iron

SKU CH-KRC5-MKQQG

Supports 3/4 in pipe with a 180 lb capacity electro-galvanized iron swivel loop hanger

  • Supports 180 lb load with iron construction
  • Fits 3/4 in pipe up to 1 1/16 in OD
  • Electro-galvanized finish resists corrosion in damp areas
  • Swivel loop allows angular adjustment during installation
  • Compact 2.3 in height suits tight overhead spaces

Split-Ring Hanger for 3/4 in Pipe

The ZORO SELECT split-ring hanger is built from electro-galvanized cast iron and rated for a maximum outside diameter of 1 1/16 in. It mounts on a 3/8 in threaded rod and carries a load capacity of 180 lb. The swivel loop design allows angular adjustment during installation. Overall height is 2.3 in and width is 1.6 in.

Suits light commercial pipe runs.

This hanger fits standard 3/4 in pipe sizes in plumbing and mechanical systems where a 180 lb capacity is sufficient. It is not cushioned, so installers needing vibration isolation or noise reduction should look elsewhere. Builders requiring higher load ratings or larger pipe diameters will need a different support.

No accessories included

The product ships as a single hanger unit without bolts, rods, cushions or insulation. The electro-galvanized finish provides corrosion resistance on its own. No additional software, fittings or mounting hardware are bundled.

Highlights

  • Supports 180 lb load with iron construction
  • Fits 3/4 in pipe up to 1 1/16 in OD
  • Electro-galvanized finish resists corrosion in damp areas
  • Swivel loop allows angular adjustment during installation
  • Compact 2.3 in height suits tight overhead spaces

Specifications

BrandZORO SELECT

Questions about this item

What threaded rod size is required to install this hanger?

The hanger is designed for a 3/8 in threaded rod to secure it overhead.

Will the electro-galvanized finish react with existing copper piping?

Electro-galvanized iron is generally compatible with copper in dry indoor plumbing applications.

How can I confirm the hanger is safely supporting the pipe after installation?

Verify the pipe sits centered in the 1 1/16 in maximum opening and the swivel loop hangs plumb without binding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.