We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic frame fan with silver metal mesh guard and seven blades

Unique-Bargains

Unique-Bargains 50mm 12V 0.12A 7 Vane Case Fan w Metal Mesh

SKU CH-K45D-8DT8M

A 50 mm DC brushless case fan with 7 vanes and metal mesh guard, running at 12 V 0.12 A

  • Keeps components cool with a 7-vane brushless motor
  • Metal mesh guard protects blades from damage
  • Lightweight 32 g frame reduces case strain
  • 12 V 0.12 A draw limits power load
  • 54 mm 2-pin connector fits standard headers

50 mm 12 V Case Fan with Metal Mesh

This 50 mm square frame fan runs on 12 V DC and draws 0.12 A through a 2.54 mm 2-pin DIN connector. A brushless motor drives seven vanes to move air across components. The unit weighs 32 g and includes a metal mesh guard that covers the intake side.

For compact builds needing a slim 15 mm profile

The thin frame fits tight brackets and side-panel mounts where a thicker fan cannot sit. The two-pin connector provides power only, so speed control or monitoring is not possible. Builds that require PWM regulation or a three-pin tachometer signal should choose a different model.

2.54 mm two-pin DIN power connector

This single specification decides compatibility; the header on your motherboard or controller must match the 2.54 mm pitch two-pin layout. If the board uses a three-pin, four-pin or proprietary header, an adapter or a different fan is required.

Highlights

  • Keeps components cool with a 7-vane brushless motor
  • Metal mesh guard protects blades from damage
  • Lightweight 32 g frame reduces case strain
  • 12 V 0.12 A draw limits power load
  • 54 mm 2-pin connector fits standard headers

Specifications

BrandUnique Bargains

Questions about this item

How do I connect the 2.54-2P DIN female connector to my motherboard or fan controller?

Align the keyed 2.54 mm pitch connector with the matching header and press straight in until it clicks; forcing it sideways bends the pins and breaks the latch.

What part will need replacement first during long-term use?

The DC brushless motor bearings are the only wearing component; when noise or vibration appears the whole fan must be swapped.

At what point does the 0.12 A current limit restrict airflow under sustained load?

The fixed 0.12 A draw caps maximum speed, so airflow cannot increase beyond the design point even if the case temperature keeps rising.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.