UGREEN
UGREEN USB 2.0 Sharing Switch 2 Computer 1 Device
Shares one USB 2.0 device between two computers with a single push-button and LED indicators
- TypeAdapter
- Share one USB device between two computers with a single button press
- Driver-free switching works on any USB-enabled computer instantly
- LED indicators show which computer currently controls the attached device
- Supports printers, scanners and other USB peripherals up to 3 m cable length
- Powered by standard 5 V USB — no external adapter required
What this switch does
The UGREEN USB 2.0 sharing switch lets two computers take turns controlling a single USB device such as a printer, scanner or plotter. A single button toggles ownership and LED indicators show which system is active. No drivers are required on any supported computer. The box includes two USB 2.0 male cables for immediate connection.
Suitable setups and limits
This switch suits offices or home labs that want to share one peripheral between two machines without unplugging cables. It is not for users who need simultaneous access from both computers or who want to share more than one device unless an additional hub is attached. The supplier notes that cable runs should stay under three metres for reliable data transfer.
Behaviour under load
The switch passes standard USB 2.0 signals, so sustained transfers run at the host controller’s bulk-endpoint rate rather than a short burst speed. The unit draws power from the 5 V USB bus; the supplier warns that any source exceeding 5 V may degrade performance or damage the adapter. No active cooling or external power supply is involved.
Highlights
- Share one USB device between two computers with a single button press
- Driver-free switching works on any USB-enabled computer instantly
- LED indicators show which computer currently controls the attached device
- Supports printers, scanners and other USB peripherals up to 3 m cable length
- Powered by standard 5 V USB — no external adapter required
Specifications
| Type | Adapter |
|---|
Questions about this item
What USB cables are required to connect the switch to my two computers?
The product includes two USB 2.0 male cables to link each computer to the switch inputs.
Will the switch work with a legacy USB 1.1 printer I still use?
Yes, the USB 2.0 interface is backward compatible with older USB 1.1 peripherals.
How can I confirm the correct computer has control of the shared device after pressing the button?
LED indicator lights on the switch show which connected computer currently controls the attached device.
More in Hub
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ViewSonic VB-WIFI-005 WiFi 6 Bluetooth 5 USB adapter
- USB
- EEE 802.11 a/b/g/n/…





