We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cold-rolled steel sliding shelf for 4-post rack, 28.3 in depth, 50 lb capacity

Tripp Lite

Tripp Lite SRSHELF4PSL server accessory sliding shelf 28.3 in depth 50 lb capacity

SKU CH-PXDT-02V8C MPN SRSHELF4PSL

Sliding shelf mounts in a four-post rack, extends to hold tower units or monitors up to 50 lb with 28.3 in depth

  • TypeHome and Garden
  • FeaturesSliding Shelf mountable rack accessory Designed for 4 post r
  • Sliding shelf installs in four-post racks
  • 3 in depth fits deep equipment
  • Extends fully to reach tower units
  • Cold-rolled steel handles 50 lb load
  • Mounting hardware included for quick setup

Sliding shelf for four-post racks

This 16-inch deep sliding shelf mounts into standard four-post racks and extends to hold tower servers, monitors or similar gear. It is built from cold-rolled steel with a black finish and ships with the required mounting hardware. The unit is intended for installers who need a sturdy pull-out surface inside a rack cabinet.

50 lb load limit and 28.3 in depth

The shelf supports up to 50 lb (23 kg) of evenly distributed weight, which suits most single rack-mount appliances or small tower units. Its overall depth is 28.3 in (719 mm / 72 cm), so the rack must provide at least that much clear space between front and rear rails. Heavier or deeper equipment will exceed the rated capacity.

Fits towers and monitors within rated depth

The extendable design accommodates tower chassis and desktop monitors that sit within the 16-inch shelf surface and the 28.3-inch overall depth. It does not suit equipment that is heavier than 50 lb, deeper than the shelf allows, or that requires a fixed rather than sliding mount.

Highlights

  • Sliding shelf installs in four-post racks
  • 3 in depth fits deep equipment
  • Extends fully to reach tower units
  • Cold-rolled steel handles 50 lb load
  • Mounting hardware included for quick setup

Specifications

BrandTRIPP LITE
ModelSRSHELF4PSL
TypeHome and Garden
FeaturesSliding Shelf mountable rack accessory
Designed for 4 post rack mounting
16 inch shelf depth, supports up to 50 lbs.
Extendible shelf accomodates tower units, monitors, and other equipment
Cold rolled steel with black finish
Required mounting hardware included
Shipping weight8.60 kg
Package size795 × 523 × 66 mm

Questions about this item

Is the 16 inch shelf depth or the 28.3 inch overall depth the usable space for my equipment?

The usable shelf surface is 16 inches deep; the 28.3 inch figure is the total assembly depth including the sliding rails and mounting flanges.

Will the 50 lb rating hold a tower server and a monitor together?

Yes, the shelf supports up to 50 lb (23 kg) total distributed load, which covers typical tower units and monitors mounted simultaneously.

Does the shelf work with a standard 4 post rack, and how far does it extend?

It mounts to any standard 4 post rack using the included hardware and the sliding mechanism extends the full shelf depth for front access.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.