Tripp Lite
Tripp Lite SR1UPANEL200 1U Blanking Panel Kit 200 pieces server accessory
Fills unused 1U rack spaces with 200 toolless black panels that improve airflow and cooling efficiency
- Type1U Blanking Panel Kit
- ColorBlack
- SpecificationsModel Type: Passive Cooling Shipping Dimensions: 31.5" x 22.
- Features19" 1U blanking panel kit Includes 200 pieces to fill from 1
- Improves cooling efficiency by filling unused rack space and optimizing airflow
- 200 pieces fill 1U to 200U of rack space for complete coverage
- Toolless mounting enables quick installation without tools
- 1U blanking panels fit standard 19 inch racks
- Passive cooling design requires no power or maintenance
Purpose-built airflow management
The Tripp Lite SR1UPANEL200 supplies 200 individual 1U blanking panels designed for standard 19-inch server racks. Each panel occupies one rack unit to close open slots that would otherwise allow exhaust air to recirculate into cold aisles. The kit is intended for data-centre operators and IT teams who need to maintain consistent front-to-back airflow across large cabinet populations.
Replaces ad-hoc filler panels
Unlike makeshift metal or plastic sheets cut on site, these factory-formed panels snap into square mounting holes without tools and align with numbered rack units for repeatable installation. The toolless design makes the upgrade worthwhile whenever a rack undergoes frequent equipment changes or when audit requirements demand documented airflow compliance across 200 rack units.
Limited to passive sealing
The panels provide no active cooling, filtration or cable routing; they only block unused openings in a 19-inch wide, 1.75-inch tall rack unit. Installers must verify that their rack uses standard square holes and that the 1.25-inch panel depth clears rear-mounted hardware. The kit does not address side-panel leaks, raised-floor pressure differentials or any airflow path outside the front mounting plane.
Highlights
- Improves cooling efficiency by filling unused rack space and optimizing airflow
- 200 pieces fill 1U to 200U of rack space for complete coverage
- Toolless mounting enables quick installation without tools
- 1U blanking panels fit standard 19 inch racks
- Passive cooling design requires no power or maintenance
Specifications
| Brand | TRIPP LITE |
|---|---|
| Model | SR1UPANEL200 |
| Type | 1U Blanking Panel Kit |
| Color | Black |
| Specifications | Model Type: Passive Cooling Shipping Dimensions: 31.5" x 22.6" x 26.25" Shipping weight: 56.2 lbs. Unit Dimensions: 1.75" x 19" x 1.25" Unit weight: 0.93 lb. |
| Features | 19" 1U blanking panel kit Includes 200 pieces to fill from 1U to 200U of rack space Improves cooling efficiency inside the enclosure by filling unused rack space and optimizing airflow and preventing recirculation Offers toolless mounting and fits any square hole, EIA compliant enclosure |
| Shipping weight | 25.49 kg |
| Package size | 800 × 667 × 574 mm |
Questions about this item
Will the 19-inch wide panels fit my standard server rack?
Yes, each panel is 19 inches wide to match standard 19-inch rack mounting rails.
How do I install the toolless panels without stripping the clips?
Align each panel with the square holes on the rack flange and press firmly until the integrated clips snap into place; no screws required.
If a clip breaks later, can I replace just that one panel?
The kit contains 200 individual 1U panels so you can swap out any damaged piece without buying a new set.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Western Digital
Western Digital SDPHK2H-024T-NBAAD 24TB G-RAID PROJECT 2 raid enclosure
$1,209.99
0.01438751BTC
In stock