We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U horizontal rack PDU with ten C13 outlets and two C14 inlets, LED status indicators, and mounting brackets

Tripp Lite

Tripp Lite PDUMH15HVAT PDU 10 C13 2 C14 1U TAA

SKU CH-DMY1-GTX1A MPN PDUMH15HVAT

A metered automatic-transfer-switch PDU with 10 C13 outlets and dual C14 inlets for 200–240 V, 10 A, 2.4 kW redundant power in a 1U horizontal rack mount

  • TypeSwitched, Metered
  • Rack Size1U
  • StyleHorizontal
  • Front Panel LEDs8 LEDs display power on-off status for each C13 output recep
  • CertificationsTested to UL 60950-1 (USA, Canada), CE (EU), NOM (Mexico), G
  • ROHSRoHS Complaint
  • Automatic transfer switching protects equipment during power source changes
  • Local metering shows real-time load on 10 C13 outlets
  • TAA compliance meets government procurement requirements
  • Dual C14 inlets enable redundant power input connections
  • 1U horizontal design fits standard rack installations

1U Metered ATS PDU for 200–240 V Racks

The Tripp Lite PDUMH15HVAT is a single-phase Automatic Transfer Switch and metered power distribution unit that fits a 1U horizontal rack slot. It accepts two IEC-320 C14 inlets and provides ten locking C13 outlets for servers and network gear. TAA compliance makes it suitable for government procurement.

Check dual C14 sources and 10 A load limit

Verify that your facility can supply two independent 200–240 V feeds, each terminated with a C14 plug, and that the combined draw of connected equipment stays within the 10 A maximum input current. The unit ships with two 3.6 m C13-to-C14 cords and both horizontal and vertical mounting brackets for flexible installation.

Locking outlets and front-panel status LEDs

Ten C13 receptacles accept C14 plug-lock inserts to prevent accidental disconnection during vibration or cable management. Eight front-panel LEDs show per-outlet power state while two additional LEDs confirm primary and secondary input presence. Certifications include UL 60950-1, CE, NOM, GOST, FCC Class A and EN standards.

Highlights

  • Automatic transfer switching protects equipment during power source changes
  • Local metering shows real-time load on 10 C13 outlets
  • TAA compliance meets government procurement requirements
  • Dual C14 inlets enable redundant power input connections
  • 1U horizontal design fits standard rack installations

Specifications

BrandTripp Lite
ModelPDUMH15HVAT
TypeSwitched, Metered
Rack Size1U
StyleHorizontal
Front Panel LEDs8 LEDs display power on-off status for each C13 output receptacle, plus 2 additional LEDs to indicate input power status for primary and secondary inputs
CertificationsTested to UL 60950-1 (USA, Canada), CE (EU), NOM (Mexico), GOST (Russia), EN55032:2015 and EN62040-2:2006, FCC Class A (Emissions), TAA Compliant
ROHSRoHS Complaint
Package IncludesPDUMH15HVAT TAA-Compliant 2–2.4kW Single-Phase ATS / Metered PDU
10 x C14 plug lock inserts
2 x C13 to C14 power cords, 3.6 m (11.8 Feet)
2 x Mounting brackets, horizontal
2 x Mounting brackets, vertical
6 x Screws
Owner’s manual
Input Voltage200; 208; 220; 230; 240
Maximum Input Current10A
Input Connector(s)IEC-320 C14
Cord Length12 ft
Output Voltage200; 208; 220; 230; 240V
Output Frequency50/60Hz
Output Watts (VA)2.4k Watts (240V), 2.3k Watts (230V), 2.2k Watts (220V), 2.08k Watts (208V), 2.0k Watts (200V) / 10A total capacity
Output Connector(s)10 x C13
Operating Elevation0 - 10000 Feet
Storage Temperature-15 - 50 Celcius degree
Storage Relative Humidity5 - 95%
FeaturesPrimary and Secondary Inputs for Power Redundancy
?Enables redundant power for network devices with non-redundant power supply configurations
?Dual 3.6 m input cords with IEC-320 C14 plugs connect to separate primary and secondary single-phase power sources
10 x C13 outlets
Automatic Transfer Switching
Dynamic solid-state(TRIAC) automatic transfer switching
Switches to secondary power source if primary source fails or becomes unstable
2 - 5 ms transfer time ensures uninterrupted operation of connected equipment
Built-in processor monitors both sources and prevents switching if second
Dimensions1.71" x 17.33" x 14.45"
Weight10.32 lbs.
Shipping weight7.06 kg
Package size580 × 515 × 110 mm

Questions about this item

What comes in the box and do I need to buy any cables or brackets separately?

The package includes the PDU, ten C14 plug lock inserts, two 3.6 m C13 to C14 power cords, horizontal and vertical mounting brackets, and six screws.

How do I decide between the listed input voltages and the 10 A rating for my rack?

The unit auto-senses 200–240 V and is limited to 10 A total, giving 2.0–2.4 kW depending on the supply voltage you connect.

What does the 2.4 kW headline figure mean once the PDU is installed in my cabinet?

At 240 V the ten C13 outlets share a 10 A budget, so you can draw up to 2.4 kW combined; at lower voltages the maximum drops to 2.0 kW at 200 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.