SAMSUNG M393A8G40AB2-CWEBY 64GB DDR4 3200MHz ECC
- Random Access Memory
- 1.2
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Traditions (Generic)
External desktop PC power button with 2 m cable, reset switch, HDD LED and splitter boards for easy front-panel relocation
This external power button connects to motherboard headers and provides an ON/OFF switch with a two-metre cable. It is designed for home users, computer labs, barebone systems and custom chassis builds where the original case button is difficult to reach. The switch also serves as a replacement when the built-in power button fails.
The unit operates from 0 to 100 degrees Celsius and draws 0.01 amps at 5 volts. It carries an IP00 rating, meaning it has no specific ingress protection and is intended for indoor desktop environments. No active cooling or fan is present, so the device adds no audible noise to the system.
The package includes a 1-to-2 splitter board and a 1-to-2 splitter cable, allowing the external button to work alongside the original case switch. Adhesive stickers and an installation manual are supplied for wall-mount or surface attachment without tools. No software or drivers are required.
| Type | Push Buttons |
|---|---|
| Brand | OwlTree |
| Switch Function | ON-OFF |
| Model | BT292 |
| Voltage | 5 volts |
| Housing Material | Plastic |
| Mounting Style | Wall Mount |
| Size/Dimensions | 3.6068 cm x 8.7122 cm x 11.6078 cm |
| Material | Plastic |
| Standards/Certifications | IP00, 0 |
| Horsepower | 0.01 amps |
| Operating Temperature | 0 degrees_celsius to 100 degrees_celsius |
| Operating Frequency | not_applicable |
| Duty | Desktop PCs |
| Compatibility/Fitment | Desktop PCs |
| Resolution | 1 |
| Display Type | BT292 |
| Features | Desktop PCs |
| Part Number | BT292 |
Connect the POWER SW, RESET SW, POWER LED and HDD LED cables to the matching motherboard headers, then stick the button with the adhesive pad; the step often missed is routing the 2 m cable through a front optical-drive bay, rear fan vent or expansion slot before securing the switch.
The plastic housing and adhesive sticker can degrade after prolonged exposure to the 0 to 100 °C operating range; replace the sticker if the button loosens and inspect the 0.01 A wiring for brittleness during any chassis rebuild.
The 0.01 A current rating and IP00-rated plastic housing set the practical ceiling; sustained operation near the 100 °C upper temperature limit will accelerate adhesive failure and cable insulation ageing before the switch mechanism itself wears out.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?