We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld gas detector with short probe and display

TEST PRODUCTS INTL. 725A Gas Detector Natural Gas Methane 40-5000 ppm

SKU CH-YTMP-JS8A0

Detects methane and other combustible gases from 40 to 5,000 ppm with an included calibrated sensor, operating between 32 and 104 °F on two AAA batteries for three hours

  • TypeEnvironmental & Mechanical
  • Detects methane and other combustibles from 40 ppm
  • CE and RoHS certified for safety compliance
  • Operates reliably between 32 °F and 104 °F
  • Includes calibrated sensor ready for immediate use
  • Runs up to 3 hours on two AAA batteries

Purpose & User

The TEST PRODUCTS INTL. 725A detects combustible gases including methane, propane and butane. It suits technicians and safety personnel who need a portable instrument for leak surveys or confined-space checks.

Detection Limits

The sensor responds from 40 to 5,000 ppm across the listed gases. Operation is guaranteed only between 32 and 104 degrees F, and battery life is rated at three hours from two AAA alkaline cells.

Deciding Specification

The 40 ppm lower detection limit determines whether the 725A can catch the leak levels your procedure requires. If your threshold sits below that figure, this instrument will not register the hazard.

Highlights

  • Detects methane and other combustibles from 40 ppm
  • CE and RoHS certified for safety compliance
  • Operates reliably between 32 °F and 104 °F
  • Includes calibrated sensor ready for immediate use
  • Runs up to 3 hours on two AAA batteries

Specifications

BrandTEST PRODUCTS INTL.
TypeEnvironmental & Mechanical

Questions about this item

What detection range should I expect from the 725A gas detector?

The 725A detects methane and other combustible gases from 40 ppm up to 5000 ppm with the installed calibrated sensor.

How long will the detector run on a fresh set of batteries?

Two AAA alkaline cells at 1.5 V each provide roughly 3 hours of continuous operation before replacement is needed.

Is the 725A rated for the temperatures in my workshop?

It operates reliably between 32 °F and 104 °F and carries CE and RoHS certification for safety compliance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.