We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld cable verifier in yellow rugged housing with backlit LCD screen and rubber grip

FLUKE networks

FLUKE networks MicroScanner2 Copper Cable Verifier Kit MS2-KIT

SKU CH-87DG-0GFHK

Copper cable verifier kit tests voice, data and video links with integrated RJ11, RJ45 and coax ports, shows wire map, length to 460 m, distance to fault and PoE presence on a backlit LCD.

  • TypeElectronic
  • Tests voice, data and video cables without adapters via integrated RJ11, RJ45 and coax ports
  • Oversized backlit LCD shows wire map, pair lengths, distance to fault, cable ID and far-end device simultaneously
  • Measures cable length to 460 m or 1500 ft with 0.3 m resolution and verifies to TIA 568A/B standards
  • Detects 10/100/1000 Ethernet, POTS and 802.3af PoE to rule out power issues quickly
  • Locates cables fast with IntelliTone 200 digital and analog toning in a rugged holster with magnetic strap

Copper Cable Verifier Kit

The Fluke Networks MicroScanner2 kit tests copper cabling for voice, data and video installations. Integrated RJ11, RJ45 and coax ports support low-voltage testing without adapters. It is built for technicians who need to verify wiring and locate faults on active networks.

Oversized Backlit LCD Screen

The oversized backlit LCD shows four test modes at once: graphical wire map, pair lengths, distance to fault with TDR, cable ID and far-end device detection. It displays clear results in bright light or complete darkness. The screen also detects 10/100/1000 Ethernet, POTS and PoE.

Length Measurement and Toning

Length measurement reaches 460 meter or 1500 feet with resolution to .3 meter or 1 foot. Wire map follows TIA 568A/B standards and remote ID locators are included. IntelliTone 200 digital and analog toning locates virtually any cable or wire pair.

Highlights

  • Tests voice, data and video cables without adapters via integrated RJ11, RJ45 and coax ports
  • Oversized backlit LCD shows wire map, pair lengths, distance to fault, cable ID and far-end device simultaneously
  • Measures cable length to 460 m or 1500 ft with 0.3 m resolution and verifies to TIA 568A/B standards
  • Detects 10/100/1000 Ethernet, POTS and 802.3af PoE to rule out power issues quickly
  • Locates cables fast with IntelliTone 200 digital and analog toning in a rugged holster with magnetic strap

Specifications

TypeElectronic

Questions about this item

How do I connect the MicroScanner2 to test RJ45, RJ11 and coax cables without extra adapters?

The verifier has integrated RJ11, RJ45 and coax F-connector test ports. Plug the cable directly into the matching port; no separate adapters are required for low-voltage testing.

Which batteries will I need to replace and how many of each?

The kit ships with two AA alkaline cells for the main unit and one 9 V alkaline cell for the IntelliTone 200 probe. Replace them with the same types when the low-battery indicator appears.

What is the maximum cable length the TDR can measure before it stops reporting distance to fault?

The time-domain reflectometer measures up to 460 metres or 1500 feet with a resolution of 0.3 metres or 1 foot. Beyond that length it will not display a distance-to-fault reading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.