We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cord with C20 plug and dual C19 connectors, 6.5ft total length

TeKit

TeKit C20 to Dual C19 Y Splitter 12AWG Power Extension Cord 6.5ft

SKU CH-T2AC-PSE3Y

A UL-listed Y-splitter that feeds two C19 server devices from one C20 outlet using 12AWG main and 14AWG branch conductors rated 20A and 15A at 250V over a 6.5ft length

Size 6.5 ft.

Struck-through versions exist but are not stocked here.

  • Connect two C19 devices to one C20 outlet
  • 5 ft total length with 3.2 ft to split point
  • UL Listed and RoHS compliant for safety
  • 12 AWG main trunk rated 20 A 250 V
  • 14 AWG split branches rated 15 A 250 V

Splitter Purpose

The TeKit C20 to Dual C19 Y Splitter is a new power cord that lets one C20 inlet feed two C19 outlets. It targets server and data-centre racks where blade chassis or similar equipment use C20 connections and outlet density on a UPS or PDU is limited.

Fit and Limits

Suits administrators who need to consolidate two C19 devices onto a single C20 source while keeping cable runs tidy. Not suited for installations that require more than two C19 branches.

Deciding Spec

The main trunk uses 12AWG conductors rated 20A at 250V, while each split branch drops to 14AWG rated 15A at 250V, so the splitter can only be used where the combined load stays within the 15A per branch limit.

Highlights

  • Connect two C19 devices to one C20 outlet
  • 5 ft total length with 3.2 ft to split point
  • UL Listed and RoHS compliant for safety
  • 12 AWG main trunk rated 20 A 250 V
  • 14 AWG split branches rated 15 A 250 V

Specifications

No published specifications for this item yet.

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my PDU or UPS need a C19 outlet to plug this splitter into?

Yes, the splitter's male end is a C20 plug, which only fits a C19 receptacle on your power source.

If I keep using my existing C19-to-C20 jumper cables, will they handle the 15 A branch rating?

Each branch uses 14 AWG wire rated for 15 A at 250 V, so your C19-to-C20 jumpers must also be rated for at least 15 A to avoid a bottleneck.

How can I confirm the cord meets the 20 A trunk rating after I install it?

Check that the main trunk jacket is marked SJT 3×12 AWG and that the UL listing on the moulded connectors references UL 817 and UL 62 standards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.