We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter with a straight C20 plug and right-angled C19 socket

TeKit

TeKit C20 C20 to C19 90° power extension cord

SKU CH-037C-KPNXX MPN C20

A C20 to angled C19 adapter connects rack equipment to a PDU at 16 A, 250 V with UL, CE and RoHS approval

  • TypeCable Connectors
  • Length< 1"
  • Connector Number2
  • Connector DetailC19 to C20 90 Degree adapter
  • Terminal GenderMale to Female
  • SpecificationsC20 to 90-Degree Angle C19 Power Adapter, IEC 320 C19 to Ang

Style C20 to Up/Down C19 Power Adapter

  • 90° angled C19 connector fits tight rack spaces
  • C20 plug to C19 socket converts PDU outlets directly
  • Rated 16 A at 250 V for high-power server gear
  • UL and CE listed plus RoHS certified for compliance
  • Compact design under one inch reduces cable strain

Right-Angle C19 Adapter

The TeKit C20 adapter converts a straight C20 inlet into a 90-degree C19 connection. It is built for server and networking gear that must plug into a rack PDU where rear clearance is tight. The compact elbow keeps cables close to the chassis and eases routing in dense cabinets.

Installers needing a 90-degree C19 turn

This unit serves technicians who need a single right-angle C19 junction at the PDU end. It does not extend cable reach, so installers who require extra length between the device and the power strip should look elsewhere. It also does not change voltage or current capacity, so anyone needing a different rating cannot use it.

16 A 250 V rating

The adapter carries a 16-amp, 250-volt rating and holds UL, CE and RoHS marks. That electrical limit is the deciding factor: the connected equipment and the upstream circuit must stay within these values for safe operation.

Highlights

  • 90° angled C19 connector fits tight rack spaces
  • C20 plug to C19 socket converts PDU outlets directly
  • Rated 16 A at 250 V for high-power server gear
  • UL and CE listed plus RoHS certified for compliance
  • Compact design under one inch reduces cable strain

Specifications

BrandTEKIT
Modelc20 to c19 adapter
TypeCable Connectors
Length< 1"
Connector Number2
Connector DetailC19 to C20 90 Degree adapter
Terminal GenderMale to Female
SpecificationsC20 to 90-Degree Angle C19 Power Adapter, IEC 320 C19 to Angled C20 Power Adaptor

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat or power loss should I expect from the 16 A 250 V C20 to C19 adapter when it runs continuously in a rack?

The adapter is rated for 16 amps at 250 volts and carries UL and CE listings, so normal operation stays within those limits without excess heat.

What equipment must I already have to use this 90-degree C20 male to C19 female adapter?

You need a power source with a C19 outlet — such as a rack PDU — and a device that accepts a C20 plug, like a server or network switch power supply.

Will the right-angle C19 connector clear older rack PDUs that have straight C20 inlets spaced closely together?

The 90-degree angled C19 end points the cable sideways, reducing depth and avoiding interference with adjacent straight C20 inlets on legacy PDUs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.