We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cord with NEMA 5-15P plug and two C13 connectors

TeKit

TeKit 5-15P to Dual C13 Y-Splitter Power Cord 6ft 2m

SKU CH-WY66-VPC3E

Splits one NEMA 5-15P outlet into two C13 connectors for powering dual monitors or devices from a single socket

  • TypeCable Kits
  • ColorBlack
  • Length6FT/2M
  • Connector Number3
  • Connector Detail5-15P to Dual C13 Splitter Power cord
  • Terminal GenderMale to Female

Length 2 Meter

  • Powers two C13 devices from one 5-15P outlet
  • 125 V 10 A rating suits commercial and OEM use
  • 16 AWG supply cable with 18 AWG branches
  • 2 m length gives flexible monitor placement
  • Reduces clutter by freeing outlets on strips or PDUs

Power Splitter Cable for Dual C13 Devices

This NEMA 5-15P to dual C13 Y-cable powers two monitors or other C13-equipped hardware from a single wall outlet. The 6ft length gives extra reach for monitor-arm installs while keeping the connectors secure. Rated at 125V 10A, it is built with 16AWG conductors on the plug side and 18AWG on each C13 leg.

Ideal for Dual-Monitor Desks and Tight Power Strips

The splitter frees a second outlet on a surge protector or PDU, making it useful where socket space is limited. It will not suit setups that need more than two C13 connections or devices that require a different inlet type. Buyers running higher-amperage equipment should verify the 10A rating meets their load.

10A Rating Determines Safe Load

The cable is rated for 10A at 125V, so the combined draw of both connected devices must stay within that limit. Exceeding the rating risks overheating and tripping the upstream breaker. Check each device's nameplate current before plugging both in.

Highlights

  • Powers two C13 devices from one 5-15P outlet
  • 125 V 10 A rating suits commercial and OEM use
  • 16 AWG supply cable with 18 AWG branches
  • 2 m length gives flexible monitor placement
  • Reduces clutter by freeing outlets on strips or PDUs

Specifications

BrandTEKIT
TypeCable Kits
ColorBlack
Length6FT/2M
Connector Number3
Connector Detail5-15P to Dual C13 Splitter Power cord
Terminal GenderMale to Female

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 18 AWG C13 tails need replacement before the 16 AWG 5-15P plug under continuous 10 A load?

The 18 AWG tails are rated for the same 10 A limit as the 16 AWG plug, so neither end should degrade first under normal use.

At 10 A the 18 AWG C13 conductors hit their ampacity ceiling before the 16 AWG plug does?

Both the 16 AWG plug side and the 18 AWG C13 sides share the 10 A rating, so the splitter's overall limit is reached simultaneously.

Does the Y-splitter run warm or hum when both C13 devices draw 10 A all day?

The cord is rated 125 V 10 A; at full load the 18 AWG conductors will warm slightly but stay within spec, with no audible hum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.