We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cord 10ft NEMA 5-15P plug to two C13 sockets

TeKit

TeKit 10ft 5-15P to Dual C13 Y-Splitter Power Extension Cord

SKU CH-JGT1-GB1GD

Splits one NEMA 5-15P outlet into two C13 connections for dual-monitor power, 10 ft length with 16 AWG supply and 18 AWG branches rated 125 V 10 A

  • TypeCable Kits
  • ColorBlack
  • Length10FT/3M
  • Connector Number3
  • Connector Detail5-15P to Dual C13 Splitter Power cord
  • Terminal GenderMale to Female

Length 3 Meter

  • Power two monitors from one outlet with a 10ft Y-splitter cable
  • 125V 10A rating supports monitors, computers and printers with C13 connectors
  • 16AWG supply leads and 18AWG branches deliver reliable current to both devices
  • NEMA 5-15P plug frees up space on power strips and PDUs
  • 3-metre length gives flexible reach for dual-monitor arm installations

TeKit 10ft Dual C13 Power Splitter

This 10ft Y-splitter cord connects two C13 devices to a single NEMA 5-15P wall outlet. It is designed for dual-monitor arms, PC and monitor pairs, or any equipment using a C13 inlet. The black cable reduces clutter by consolidating two power connections into one plug.

Installation and Common Issues

Plug the 5-15P male end into the outlet and attach the two C13 female ends to your devices. The 10ft length provides reach for monitor arms without straining the connectors. Ensure the combined draw of both devices stays within the 10A rating to avoid tripping the circuit.

Capacity and Limits

Rated at 125V and 10A, the cord uses 16AWG wire on the supply side and 18AWG on each C13 branch. It comfortably powers two typical monitors or a computer and monitor together. It cannot support loads exceeding 10A total or devices requiring a different connector type.

Highlights

  • Power two monitors from one outlet with a 10ft Y-splitter cable
  • 125V 10A rating supports monitors, computers and printers with C13 connectors
  • 16AWG supply leads and 18AWG branches deliver reliable current to both devices
  • NEMA 5-15P plug frees up space on power strips and PDUs
  • 3-metre length gives flexible reach for dual-monitor arm installations

Specifications

BrandTEKIT
TypeCable Kits
ColorBlack
Length10FT/3M
Connector Number3
Connector Detail5-15P to Dual C13 Splitter Power cord
Terminal GenderMale to Female

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the cord is working correctly after plugging it in?

Connect two C13 devices such as monitors, then confirm both power on and operate normally from the single 5-15P outlet.

What connectors and cable lengths are included, and what must I supply?

The cord has a NEMA 5-15P male plug and two C13 female connectors on a 10ft length; you only need devices with C13 inlets.

Which gauge version should I choose for a standard 125V 10A setup?

The cable uses 16AWG on the 5-15P side and 18AWG on each C13 branch, rated for 125V 10A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.