We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit 2-Pack 4-Pin PWM Fan Splitter Cable 25cm Black & Blue

SKU CH-Y21M-W8XKR

Connects two PWM fans to one motherboard header for synchronized speed control

  • TypeCable Connectors
  • ColorBlack & Blue
  • Length25cm/0.8ft
  • Cable Length25cm/0.8ft
  • Specifications1X2PWM25CM 10 inch Black Sleeved 4pin PWM 2-Fan Power Y Spli
  • Connector A4Pin Female

Style 1-to-2

  • Connects two fans to one motherboard header for simplified cooling expansion
  • PWM signal split lets both fans run at identical speeds under software control
  • Master/slave design sends RPM feedback from one fan for synchronized operation
  • Black-sleeved 25 cm Y-cable keeps builds tidy in open cases
  • Works with 3-pin and 4-pin fans from Corsair, Cooler Master, Noctua and Thermaltake

Two-fan PWM splitter cable for ATX cases

This TeKit 2-pack provides two Y-cables that each connect a pair of case fans to one motherboard 4-pin header. Builders expanding airflow in a standard ATX chassis can run both fans from a single PWM channel. The 25 cm length suits typical internal routing without excess slack.

Black-sleeved 10 cm leads

Each splitter carries a 4-pin female connector on the motherboard side and two fan leads — one 4-pin, one 3-pin — so the board reads RPM from the first fan while the second follows the same PWM duty cycle. The sleeved 10 cm tails keep the wiring tidy in open or windowed cases.

4-pin header with dual-fan PWM sync

The decisive spec is the master-slave pinout: only the first fan reports speed to the motherboard, forcing both fans to spin identically. Buyers who need independent speed curves per fan or who must monitor RPM on every connected fan cannot use this cable.

Highlights

  • Connects two fans to one motherboard header for simplified cooling expansion
  • PWM signal split lets both fans run at identical speeds under software control
  • Master/slave design sends RPM feedback from one fan for synchronized operation
  • Black-sleeved 25 cm Y-cable keeps builds tidy in open cases
  • Works with 3-pin and 4-pin fans from Corsair, Cooler Master, Noctua and Thermaltake

Specifications

Brandtekit
TypeCable Connectors
ColorBlack & Blue
Length25cm/0.8ft
Cable Length25cm/0.8ft
Specifications1X2PWM25CM 10 inch Black Sleeved 4pin PWM 2-Fan Power Y Splitter Cable,PMW 4pin 1 to 2 Converter Cable - 10"
Connector A4Pin Female
Connector B3Pin Male
Connector Number2
Connector DetailComputer PC Fan Power Case Black Fan Splitter Cable 1 to 2 Converter for ATX Computer Case Cooling Fans
Terminal GenderMale to Female
Features1X2PWM25CM 10 inch Black Sleeved 4pin PWM 2-Fan Power Y Splitter Cable,PMW 4pin 1 to 2 Converter Cable - 10"

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the splitter's connectors wear out if I reconfigure fans later?

The cable uses a 4-pin female header and two 3-pin male plugs rated for standard motherboard fan headers; normal reconnection cycles are well within their design life.

What limits how many fans I can chain from one header using this splitter?

The motherboard header's current rating is the limiting factor; this splitter passes the PWM signal to two fans but does not increase the header's power budget.

How much heat does the cable add when both fans run all day?

The 25 cm sleeved cable adds negligible resistance, so it does not generate measurable heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.