We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black sleeved Y cables each with one 4-pin female and three 3-pin male connectors

TeKit

TeKit 1007 4-Pin PWM Fan Splitter Cable 1-to-3 25cm 2-Pack

SKU CH-KRVG-S410S MPN 1007

Two 25 cm cables each split one motherboard 4-pin header to three fans with PWM speed sync

  • TypeCable Connectors
  • ColorBlack & Clear
  • Length25cm/0.8ft
  • Cable Length25cm/0.8ft
  • Specifications1X3PWM25CM 10 inch Black Sleeved 4pin PWM Power Y Splitter C
  • Connector A4Pin Female

Style 1-to-3

  • Connect three fans from one header with 4-pin PWM splitter
  • Unified PWM control keeps all fans at identical speeds
  • Synchronised RPM signal on master connector for coordinated operation
  • Two-pack gives a spare cable for future cooling upgrades
  • Black sleeved 25 cm cables fit tidy 120 mm to 230 mm fan setups

Triple Fan PWM Splitter

The TeKit 1007 cable connects three case fans to one motherboard 4-pin header so they share a single PWM signal. It suits builders who want synchronised speed control across multiple fans without using extra headers. The pack includes two 25 cm sleeved cables for separate fan groups. Buyers needing voltage-only control or more than three fans per header should look elsewhere.

Plug-and-Play Installation

Each cable has a keyed 4-pin female connector for the motherboard and three 3-pin male plugs for the fans; the key prevents reversed insertion. The master lead carries the PWM wire while the two follower leads omit the RPM pin, so all three fans run at the same duty cycle when the board supports PWM. A common issue is forgetting that follower fans will not report individual speeds back to the BIOS.

25 cm Sleeved Length

The working length is 25 cm (approximately 10 inches) from the motherboard connector to the furthest fan plug. Black sleeving keeps the 24 AWG tinned-copper wires tidy inside the case. Verify that this reach covers the distance from your fan header to the most distant fan mounting point before ordering.

Highlights

  • Connect three fans from one header with 4-pin PWM splitter
  • Unified PWM control keeps all fans at identical speeds
  • Synchronised RPM signal on master connector for coordinated operation
  • Two-pack gives a spare cable for future cooling upgrades
  • Black sleeved 25 cm cables fit tidy 120 mm to 230 mm fan setups

Specifications

Brandtekit
TypeCable Connectors
ColorBlack & Clear
Length25cm/0.8ft
Cable Length25cm/0.8ft
Specifications1X3PWM25CM 10 inch Black Sleeved 4pin PWM Power Y Splitter Cable,PMW 4pin 1 to 3 Converter Cable - 10"
Connector A4Pin Female
Connector B3X 3-Pin Male
Connector Number4
Connector DetailComputer PC Fan Power Case Black Fan Splitter Cable 1 to 3 Converter for ATX Computer Case Cooling Fans
Terminal GenderMale to Female
Features1X3PWM25CM 10 inch Black Sleeved 4pin PWM Power Y Splitter Cable,PMW 4pin 1 to 3 Converter Cable - 10"

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the PWM control is working after I connect three fans to the 4-pin motherboard header using this splitter?

The master connector carries the PWM signal to all three fans; in BIOS or fan-control software set the header to PWM mode and confirm all connected fans report identical RPM changes when you adjust the curve.

What connectors and cables are included in the 2-pack and is any extra wiring required?

Each pack contains two 25 cm sleeved cables; each cable has one 4-pin female connector for the motherboard and three 3-pin male connectors for the fans — no additional cables are needed.

Should I choose the 25 cm version or a longer length for a standard ATX case?

The only length offered in this listing is 25 cm; it suits typical motherboard-to-fan distances in ATX builds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.