We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue desoldering braid on an ESD-safe spool

TechSpray

TechSpray Pro-Wick Blue #4 Braid 1811-5F soldering

SKU CH-2FQY-5V6EC

Desoldering braid with rosin flux on an ESD-safe spool meets IPC, MIL and NASA standards

  • TypeBlue #4 Braid
  • Color/FinishBlue
  • Lead-free Rosin flux enables clean desoldering
  • Blue #4 braid width 0.098 in suits fine joints
  • Five-foot spool on ESD-safe bobbin protects components
  • Meets IPC J-STD-004 and MIL-F-14256 standards
  • NASA NHB 5300 4 and NPC 200-4 qualified

Pro-Wick Blue #4 Braid for desoldering

This desoldering braid uses rosin flux classified as ROL0 to remove solder from joints and pads. The blue coating identifies the #4 width of 0.098 in for medium-scale work. It meets IPC J-STD-004 and multiple NASA standards for high-reliability assembly and repair tasks.

Anti-static spool protects sensitive components

The ESD-safe bobbin prevents static discharge while you handle the braid near static-sensitive devices. Five feet of lead-free, flux-coated braid are supplied on the spool so you can cut the exact length needed for each joint without waste.

Check flux compatibility and width before ordering

Verify that rosin-based ROL0 flux is acceptable for your assembly process and cleaning regime. Confirm the 0.098 in braid width suits the pad spacing and component density on the boards you intend to rework.

Highlights

  • Lead-free Rosin flux enables clean desoldering
  • Blue #4 braid width 0.098 in suits fine joints
  • Five-foot spool on ESD-safe bobbin protects components
  • Meets IPC J-STD-004 and MIL-F-14256 standards
  • NASA NHB 5300 4 and NPC 200-4 qualified

Specifications

BrandTechspray
TypeBlue #4 Braid
Color/FinishBlue

Questions about this item

When will the 5 ft spool of #4 braid need replacing?

The spool holds 5 ft of 0.098 in wide braid; replace it once the length is fully consumed during desoldering work.

What limits continuous use of the rosin-flux braid first?

The 5 ft length on the ESD-safe bobbin is the limiting factor; when the braid runs out, wicking stops until a new spool is fitted.

Does the lead-free, ROL0-classified braid produce fumes or heat during all-day desoldering?

The braid itself generates no heat or noise; only the soldering iron creates heat, while the rosin flux may release typical soldering fumes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.