We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow SATA cable with 90-degree right-angle connector on one end and straight connector on the other, .5m length

Takrabssin

Takrabssin SATA cable 90 degree right angle 1.64ft .5m yellow

SKU CH-XWVF-6VS2Y

A 1.64 ft SATA III cable with a 90-degree right-angle connector on one end and a straight connector on the other, supporting 6.0 Gbps data transfer

  • TypeSATA III
  • ColorBlack
  • Length1.64ft/0.5m
  • Connector Number2
  • Connector Detail90 Degree Right to Straight
  • SpecificationsSATA III with 90 Degree Right to Straight Connectors

Color Yellow

  • 90° angled connector fits tight spaces without crimping
  • Metal latch on each end secures the cable firmly
  • SATA III compliant for up to 6.0 Gbps transfers
  • 64 ft length keeps internal routing clean and short
  • 7-pin connectors at both ends ensure reliable drive links

Tight-space SATA III cable

This 1.64ft SATA III cable uses a 90-degree right-angle connector on one end and a straight connector on the other to fit cramped drive bays or crowded motherboard headers. Metal latches on both 7-pin plugs lock the link in place so vibration cannot unseat the connection. The flat, slim profile reduces bulk behind drives and improves airflow in compact builds.

Replaces straight-to-straight leads

Swap a standard straight cable when a drive sits flush against a case wall, a GPU back-plate or a PSU shroud and the header points sideways. The right-angle plug eliminates the sharp bend that fatigues wires and can drop link speed over time. Keep the existing straight cable if every header and drive port has clear rear clearance.

Sustained 6.0 Gbps throughput

Rated for the SATA III 6.0 Gbps ceiling, the cable maintains full bandwidth during long sequential reads and writes such as disk cloning, video ingest or RAID rebuilds. Shielded construction and the secure metal latches prevent intermittent errors that appear only after the link has warmed up under continuous load.

Highlights

  • 90° angled connector fits tight spaces without crimping
  • Metal latch on each end secures the cable firmly
  • SATA III compliant for up to 6.0 Gbps transfers
  • 64 ft length keeps internal routing clean and short
  • 7-pin connectors at both ends ensure reliable drive links

Specifications

TypeSATA III
ColorBlack
Length1.64ft/0.5m
Connector Number2
Connector Detail90 Degree Right to Straight
SpecificationsSATA III with 90 Degree Right to Straight Connectors

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 90-degree right-angle connector fit alongside my motherboard's SATA port without blocking the adjacent slot?

The 90-degree right-angle connector directs the cable parallel to the board, keeping the adjacent SATA port free for another device.

How do I secure the cable so the metal latch actually clicks onto the drive and motherboard ports?

Align the 7-pin connector, push straight in until the metal latch snaps over the port's notch, then tug gently to confirm it is locked.

When should I replace this SATA III cable if transfer speeds drop below 6.0 Gbps?

Replace the cable if you see bent pins, cracked insulation, intermittent drive detection, or consistent errors during large file transfers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.