We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCB adapter with vertical 19-pin and 20-pin headers to USB Type-E connector

SXDOOL

SXDOOL USB 3.0 19P/20P to Type-E Adapter

SKU CH-GD5Z-BHNMS

Converts a motherboard 19-pin USB 3.0 header to a 20-pin Type-E connector for front-panel USB 3.1 Type-C ports at up to 10 Gbps

  • TypeCase Fan Accessory
  • Converts motherboard 19-pin USB 3.0 header to Type-E for front-panel USB-C
  • Delivers up to 10 Gbps throughput when host controller supports USB 3.1 Gen 2
  • Reversible Type-C connector removes orientation hassle and requires no driver installation
  • Vertical low-profile design fits tight cases without fouling adjacent expansion cards
  • Works with Windows XP through 10 (32/64-bit), macOS and Linux out of the box

Front-panel Type-E adapter for USB 3.0 headers

This small bracket-mounted card converts a motherboard USB 3.0 19-pin header into a USB 3.1 Gen 2 Type-E port so a case front-panel USB-C connector can be used. It supports Windows XP through Windows 10, macOS and Linux without driver installation. The reversible Type-C design removes orientation guesswork.

Replaces a missing native Type-E header on older

Boards that only expose a 19-pin USB 3.0 header gain a 20-pin Type-E connection, letting the case front USB-C port run at up to 10 Gbps where the host controller allows. The jump is worth it when a new chassis includes USB-C but the motherboard lacks the matching header.

Fits a PCI slot bracket

Vertical orientation keeps the PCB clear of neighbouring expansion cards and the integrated differential-signal optimisation aims for stable throughput. No extra power cable or software is required; the adapter simply bridges the header to the case cable. Builders whose motherboard already provides a native Type-E header do not need this card.

Highlights

  • Converts motherboard 19-pin USB 3.0 header to Type-E for front-panel USB-C
  • Delivers up to 10 Gbps throughput when host controller supports USB 3.1 Gen 2
  • Reversible Type-C connector removes orientation hassle and requires no driver installation
  • Vertical low-profile design fits tight cases without fouling adjacent expansion cards
  • Works with Windows XP through 10 (32/64-bit), macOS and Linux out of the box

Specifications

TypeCase Fan Accessory

Questions about this item

What bracket or slot does the SXDOOL USB 3.0 19P/20P to Type-E Adapter mount in?

The adapter installs on a standard PCI bracket, using the motherboard's internal 19-pin USB 3.0 header for the Type-E connection.

How do I connect the SXDOOL adapter, and which header orientation trips people up?

Plug the 19-pin connector vertically into the motherboard's USB 3.0 header; the keyed shroud only fits one way, so forcing it reversed is the common mistake.

Will the SXDOOL adapter need a firmware update or driver reinstall later?

No driver or firmware is required; it is a passive signal converter, so only a damaged cable or bent header pin would ever need replacement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.