We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 92 mm VGA cooling fan with five-hole mounting bracket

SXDOOL

SXDOOL FD9238M12D 12V .7A VGA cooling

SKU CH-TJM2-5TEDF MPN FD9238M12D

Replaces ATI turbo graphics card fans with a 12 V, 0.7 A PWM model on a black five-hole bracket

  • PWM speed control adjusts cooling to GPU load
  • 12 V .7 A power draw suits standard graphics-card headers
  • Ball-bearing motor reduces wear for longer service life
  • Black bracket with five mounting holes fits multiple ATI turbo models
  • 4-pin connector enables automatic fan-speed regulation

Replacement fan for ATI turbo graphics cards

This SXDOOL FD9238M12D cooler is a new public-version replacement fan designed for ATI turbo-style graphics cards. It mounts using a black bracket with five mounting holes to match the original cooler layout. The unit suits builders repairing or refreshing a compatible reference-design board. Buyers needing a different mounting pattern or a non-turbo cooler will not be served by this part.

Four-pin PWM interface with 0.7 A draw

The fan connects through a standard graphics-card four-pin interface that supports PWM automatic speed regulation. It operates at 12 V and draws 0.7 A, allowing the GPU to control fan speed dynamically based on temperature. This electrical profile is the single specification that determines whether the cooler matches the card’s header and power budget. Cards lacking a four-pin PWM header or requiring a different current rating cannot use this fan.

Drops into the existing turbo cooler shroud

The black five-hole bracket aligns with the original turbo cooler mounting points, so the fan installs without modifying the heatsink or shroud. PWM control frees the builder from manual fan curves while the 12 V supply comes directly from the graphics card. No external power cables or controller boxes are required. Builds that need a larger heatsink, liquid cooling or a dual-fan layout must look elsewhere.

Highlights

  • PWM speed control adjusts cooling to GPU load
  • 12 V .7 A power draw suits standard graphics-card headers
  • Ball-bearing motor reduces wear for longer service life
  • Black bracket with five mounting holes fits multiple ATI turbo models
  • 4-pin connector enables automatic fan-speed regulation

Specifications

No published specifications for this item yet.

Questions about this item

What does the .7 A current draw mean for my graphics card?

The fan draws .7 A at 12 V, a low load that most GPU fan headers can supply without affecting the card's power budget.

What does the 4-pin PWM interface actually control?

The 4-pin connector lets the graphics card regulate fan speed automatically via PWM based on GPU temperature.

Will the 5-hole black bracket line up with my card's mounting points?

The included black bracket has five mounting holes designed for ATI turbo-style graphics card coolers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.