We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SXDOOL

SXDOOL 60mm slim case fan 12V 0.15A 10mm thick 11 blade 601012M

SKU CH-036X-XR0HK

A 60 mm slim case fan delivering 17.7 cfm at 35 dB from a 10 mm frame with 11 blades and oil bearing

  • Fan Size60mm
  • Slim 10 mm profile fits tight spaces
  • 11 blades deliver 17.7 cfm airflow
  • Oil bearing runs at 35 dB noise
  • 12 V 0.15 A draws minimal power
  • 29 cm 2-pin lead simplifies installation

60 mm slim 12 V case fan

The SXDOOL 601012M is a 60 mm square frame just 10 mm thick, designed for small-form-factor cases, slim server chassis or appliance enclosures where space is tight. It runs on 12 V DC at 0.15 A and spins at 4200 rpm with an 11-blade rotor.

Fits tight 60 mm mounts needing low profile

Builders who need a 60 mm fan no thicker than 10 mm for CPU coolers, GPU shrouds or embedded boards will find the dimensions match. Those who require higher static pressure, PWM speed control or a 3-pin or 4-pin header should look elsewhere because this unit uses a 2-wire 29 cm lead and oil-bearing motor.

17.7 cfm airflow at 35 dB noise

The single figure that decides fit is the 17.7 cfm air volume delivered at 35 dB, which determines whether cooling capacity meets the thermal load in the target enclosure.

Highlights

  • Slim 10 mm profile fits tight spaces
  • 11 blades deliver 17.7 cfm airflow
  • Oil bearing runs at 35 dB noise
  • 12 V 0.15 A draws minimal power
  • 29 cm 2-pin lead simplifies installation

Specifications

Fan Size60mm

Questions about this item

Will the 60mm square frame and 10mm thickness fit my slim chassis?

The fan measures 60 by 60 by 10mm and weighs 24g, so it fits standard 60mm mounting holes in thin enclosures.

How do I connect the 2P2 line cable and what is the common wiring mistake?

Plug the 29cm two-pin connector into a 12V DC header; the error is reversing polarity — match the wire colours to the header markings.

When should I replace the oil-bearing fan?

Expect the oil bearing to last until noise rises above 35dB or speed drops below 4200 rpm, then swap the unit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.